Look what came in today!!
Trending Topics
#11
Pole Position
Thread Starter
Join Date: Feb 2007
Location: CA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Little update. Pull the head off today and completely disassembled.
It looks pretty bad. Couple of the exhaust valves looks like its about to go.
Springs don't seem to have too much tension in it.
Any aftermarket valves/springs you guys could recommend?
After cleaning off the surface as much as I could before it goes into the machine shop for hottank and resurface.
Pictures of the block. Looks pretty bad. Probably am going to rebuild the whole bottom end with new rings, bearings, and arp bolts.
It looks pretty bad. Couple of the exhaust valves looks like its about to go.
Springs don't seem to have too much tension in it.
Any aftermarket valves/springs you guys could recommend?
After cleaning off the surface as much as I could before it goes into the machine shop for hottank and resurface.
Pictures of the block. Looks pretty bad. Probably am going to rebuild the whole bottom end with new rings, bearings, and arp bolts.