the hell with 400whp ! im changing the setup again !
05-09-07, 10:02 PM
#46
ok here is where we are at, 6 speed is in, gs diff is in and welded, driveshaft is going to be done this week, the boostlogic manifold fit the 76gts with room to spare of the dist. got the new tt style intake manifold, wilson throttle body 90mm, fuel rail, and lots of other stuff done. went the full route tt valve covers, just need to run fuel lines, and pumps with the dual pump hanger. and lots more.
i will get pics shortly.
i will get pics shortly.
05-10-07, 07:32 AM
#47
Lexus Test Driver
This is gonna be nice!! Good work ben! I see I am not the only one collecting parts because I am tired of the weaksauce 400 hp. I will be back in full swing by next summer with about 800 on pump gas!!! Woohoo buildem and breakem baby!
05-14-07, 04:12 PM
#50
progress pics, not many pics but something to reference as needed. throw questions if you have them.
v160 in with rps stage 3 clutch
you NEED the brace if you go v160 trans from a 5 speed. here it is.
greddy oil cooler in place on passenger side.
im still working on the wiring harness so i can hide it.
v160 in with rps stage 3 clutch
you NEED the brace if you go v160 trans from a 5 speed. here it is.
greddy oil cooler in place on passenger side.
im still working on the wiring harness so i can hide it.
Have you noticed any benefits from the oil cooler? (i.e. log data showing cooler oil temps??)
05-16-07, 09:10 AM
#55
Lexus Test Driver
Join Date: Mar 2003
Location: Los Angeles
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
Wow Ben, alot of progress. Keep us updated.
I found a local place with 101 octane at the pump, and 2 places that carry barrels of 104/109 octane. Put some in that beast when its ready.
I found a local place with 101 octane at the pump, and 2 places that carry barrels of 104/109 octane. Put some in that beast when its ready.
06-26-07, 04:00 PM
#56
ok progress update.
all that is left is fuel pumps,spark plug wires, down pipe, radiator refill and hose, hook up some gauges and a few other things. here are a couple of pics.
ps relocated with injector resistor box,ignitor,and map sensor
these are going into an extra block now.
all that is left is fuel pumps,spark plug wires, down pipe, radiator refill and hose, hook up some gauges and a few other things. here are a couple of pics.
ps relocated with injector resistor box,ignitor,and map sensor
these are going into an extra block now.
06-26-07, 10:18 PM
#57
*****Do not buy from this member until further notice *****
Join Date: Jun 2006
Location: 2 CAR LENGTH AHEAD OF YOU!!!
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
ben my man looks good guess what i just ripped my motor apart lol. to hell with 320hp was wondering who did your head work i wanna refresh my head for a decent price let me know man
06-27-07, 10:53 AM
#59
they are putting together my 2jzgte motor now, so we should be all good soon. im gonna blow up the ge motor in the car now then install the tt block and boost it to 40ish psi and see what it does. it should be all good.
06-27-07, 11:22 AM
#60
Lexus Champion
Join Date: Jan 2006
Location: New Orleans Suburbs
Posts: 1,773
Likes: 0
Received 0 Likes
on
0 Posts
I've been following this from the start and it sure has come a long way. Reading this has also answered some question I had too. Nice work man, can't wait for the outcome. I expect Vids from the track and/or when you blow it....