2JZ Soarer Wiring Diagrams
05-17-06, 06:47 AM
#1
Driver School Candidate
Thread Starter
Join Date: May 2006
Location: NZ
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2JZ Soarer Wiring Diagrams
Hi guys, sorry if ive posted this in the wrong place. Ive recently started under going a 2jz-gte conversion into my 91 Toyota Soarer JZZ30. My engine is out of a Toyota Aristo JDM, im going to be running the standard ECU and loom. Basically im just wondering if anyone knows where i can get pinout diagrams for the ECU, and also http://i80.photobucket.com/albums/j1...ristoplugs.jpg im after diagrams for plug "B". Ive got all supra diagrams but i have been told that both looms are basically identical, i just want to know what the differences are. If anyone could help me with these diagrams or point me in the right direction towards finding them it would be greatly apprectiated. thanks for all your time.
05-18-06, 02:34 PM
#3
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
the aristo body plug pinouts are real hard to find. also...as far as the engine harness...there is one ecu plug that is not on the harness in the picture. the ECU has 3 plugs. i believe it comes on a separate harness that you may have not gotten with the motor. also...the plug for the igniter is not on the engine harness but on the engine bay harness instead. you may need to pick up a supra harness or build a harness from scratch to get it going. good luck with the swap.
Thread
Thread Starter
Forum
Replies
Last Post
IneednSC
Performance & Maintenance
1
10-04-14 03:06 PM
