Engine Mounts in SC 300 - What all do I need?
10-02-04, 11:31 PM
#1
Instructor
Thread Starter
Engine Mounts in SC 300 - What all do I need?
Alright, went to go order engine mounts, from http://www.partsdiscountwarehouse.com/
I found like 4 different things
Mounting Insulator - $127
Front Bracket Right - $78
Front Bracket Left - $78
Rear Mount - $55
Which ones of these do I actually need. I know I need the rear mount, but do I need the front bracket right and left and the mounting insulator along with it?
Thx!
I found like 4 different things
Mounting Insulator - $127
Front Bracket Right - $78
Front Bracket Left - $78
Rear Mount - $55
Which ones of these do I actually need. I know I need the rear mount, but do I need the front bracket right and left and the mounting insulator along with it?
Thx!
10-13-04, 04:31 PM
#2
Driver School Candidate
Join Date: May 2004
Location: Pennsylvania
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Engine Mounts
I need them too.
My SC400 failed state inspection today. (In PA they check this kind of thing)
I ordered from the dealer $107 each for the engine mounts $66 for the trans.
I couldn't find them aftermarket don't know if you can and I don't want to mess with the wrong parts.
Good Luck, I hear the trans is easy but the engine is a job that I'm leaving to the professionals.
My SC400 failed state inspection today. (In PA they check this kind of thing)
I ordered from the dealer $107 each for the engine mounts $66 for the trans.
I couldn't find them aftermarket don't know if you can and I don't want to mess with the wrong parts.
Good Luck, I hear the trans is easy but the engine is a job that I'm leaving to the professionals.
Thread
Thread Starter
Forum
Replies
Last Post
vinny186
ES - 1st to 4th Gen (1990-2006)
3
11-23-06 11:18 AM