New project!
#16
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: New Jersey
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
So some progress today
Switched title over
Insured it. Registered it so i can start driving it now that it has brakes
Fixed the door latch
I got the windshield replaced and i threw a wheel on it so i can drive it around so i can get it inspected before i start tampering with the motor >=)
Oh. Test fitted wheels on and dropped the rear to see how much i need to roll the fenders to accommodate the new wheels. For fun i left a stockie on the right side.
Tomorrow. Ls400 caliper front upgrade and drop the front to see how it sits up front
Switched title over
Insured it. Registered it so i can start driving it now that it has brakes
Fixed the door latch
I got the windshield replaced and i threw a wheel on it so i can drive it around so i can get it inspected before i start tampering with the motor >=)
Oh. Test fitted wheels on and dropped the rear to see how much i need to roll the fenders to accommodate the new wheels. For fun i left a stockie on the right side.
Tomorrow. Ls400 caliper front upgrade and drop the front to see how it sits up front
#17
comin out nice really fast lol, it looks like my build times 10! G/L and i was about to upgrade to ls calipers until i changed my mind and got supra's : are those stock rotors? im getting slotted/slated soon
#18
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: New Jersey
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
I decided to advance auto most of the items i needed. So i bought it and just did it all in my garage. Saves me a good chunk of money plus i get a courtesy discount there and racking up points!!
Im throwing on stock ls400 rotors and stock ls400 calipers. Ill post a picture tomorrow when i have them on.
If you really want some help let me know or any of us know. A couple of us on here been through quite a few sc s so its almost a walk in the park
Im throwing on stock ls400 rotors and stock ls400 calipers. Ill post a picture tomorrow when i have them on.
If you really want some help let me know or any of us know. A couple of us on here been through quite a few sc s so its almost a walk in the park
#19
I decided to advance auto most of the items i needed. So i bought it and just did it all in my garage. Saves me a good chunk of money plus i get a courtesy discount there and racking up points!!
Im throwing on stock ls400 rotors and stock ls400 calipers. Ill post a picture tomorrow when i have them on.
If you really want some help let me know or any of us know. A couple of us on here been through quite a few sc s so its almost a walk in the park
Im throwing on stock ls400 rotors and stock ls400 calipers. Ill post a picture tomorrow when i have them on.
If you really want some help let me know or any of us know. A couple of us on here been through quite a few sc s so its almost a walk in the park
#23
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: New Jersey
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
So.
Progress update.
I fixed the window track finally so drivers window is fixed
Then i know all the struts were blown so i did coilovers
Also did ls400 front brakes.
Got new wheels and some rubber for the car
Rolled the rear fenders. However the front need some adjustments. A little too low. Not sure if i want to roll the fender or raise the height some
Final product pictures
How it looks now
Progress update.
I fixed the window track finally so drivers window is fixed
Then i know all the struts were blown so i did coilovers
Also did ls400 front brakes.
Got new wheels and some rubber for the car
Rolled the rear fenders. However the front need some adjustments. A little too low. Not sure if i want to roll the fender or raise the height some
Final product pictures
How it looks now
Thread
Thread Starter
Forum
Replies
Last Post
Weapon F
IS F (2008-2014)
8
04-15-17 07:50 AM