fender rolling time
fender rolling time
Fender Roller: i don't have one but i know can rent one online. anybody got one around the VA area i can borrow or drive over to? putting my suspension in next week. thanks.
Trending Topics
bump, two weeks worth of new tires rubbing has passed...still no roll..anyone in fairfax have one I can rent or pay a six pack for? OR we can do a FENDER ROLLING MEET starring Clint EASTWOOD, the fender roller...
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Lexus Fanatic
Joined: Sep 2005
Posts: 5,095
Likes: 9
From: The Rotten Apple
Went to Marty at VIP Garage and he did a really good job. Took about an hour each corner (he went at it with a lot of patience), rolled it perfect. no dents, chips whatsoever. Saw sherwin's car too with the new gte swap, nice car bro, looks like it's on its way!
Lead Lap
Joined: May 2007
Posts: 432
Likes: 0
From: SI/Queens, NY
LOL @ the "Billy Bat" being used as a fender rolling tool. Where did you get one of those anyway? Have a cop in the family?
To the OP:
Lexus fenders are very thick so props to him for not putting "nipples" in the fenders
To the OP:
Lexus fenders are very thick so props to him for not putting "nipples" in the fenders
I also need this done before my new wheels get here I was thinking to just roll the front and shave the rears a lil. I heard the rears are hard to roll and may cause paint chips and dimples in the panel. I have a dremel but i dont have a roller so i can bring the dremel if someone wants to rent a roller i would def be willing to meet up
for the sc, it can only be rolled up to a certain point and once you roll past that point there's a possibility it will dent or cause dimples on the panel. marty did not roll past that point due to his experience with sc's in the past.