Hey guys,

Tried searching for this, but all out of luck.

I have a problem. The other day I was trying to clean my EGR and I noticed 2 loose "hoses". I tugged a little and sha-bam, the 2 came off. Now every time I start my car, the TRAC light between my RPM gauge is on.

I really have no idea where does these 2 hoses go to. Anyone can put me into the best way to put this back? Below are some pictures I just took today. The hoses are labeled #6 if anything helps. Thanks in advance.

The car is a 1992 SC400

_____________________


[IMG][/IMG]

 

bump for myself.

 

when I get back to work tomarrow I will look up the vaccuum diagram and reply back

 

Thanks a bunch RTGS400!

 

Ok, so i dont have a picture, but i checked out an SC400 we had on the lot here. Right below the passenger side valve cover, below the intake tube, there is a VSV (vacuum switching valve), and it accepts the two vacuum lines you are holding. So take off your intake boot/tube, and it should be right under there. I will try to snap a picture.. cause i cant find it in the repair manual at the moment.. but i will keep looking.

 

I'm definitely gonna take it out and check on it tomorrow. Thanks again RTGS400!