I saw a reference at a dealer website about "full speed" ACC on the LX. I thought the ACC was the first generation that only functioned above 25mph and wasn't the newer Stop and Go type.

Does the ACC on the LX function in stop and go traffic?

 

I have a 2016 and it does work under 25 mph. If it comes to a complete stop you have to press the accelerator to get it going again, but it will resume the previous setting.

 

Full speed ACC is available from 2016 on LX only, for some reasons not on Land Cruiser.

 

Thanks guys. Interesting about the LC.

 

My 2017 has stop and go. It works decent, but it’s a heavy vehicle so you have to pay close attention.
I think it follows to far on the closest setting, allowing cars to move in front of you. Still it does save a lot of
leg pain.

 

If you think that it drives to far on the closest settings, please don't drive to Northern Nevada (you can still drive in Vegas). Stay in Texas or you can drive in Europe. Medium setting is fine here (and also safe because medium is about 2 seconds which is the required distance by law).
I know that some drivers with California license plates move in front of me when driving on medium distance. But we hate these drivers here. They should stay in California.