Which wires to tap for subwoofer amplifier (ML system)?
Thread Starter
4th Gear
Joined: May 2014
Posts: 4
Likes: 1
From: IL
Which wires to tap for subwoofer amplifier (ML system)?
Greetings and Salutations,
I have a 2013 LX570 with the ML system. I currently have a Rockford Fosgate 500w powered sub that I hooked up using the ML sub leads. I feel like I am missing some range and would like to try and grab the signal from the front door speakers unless there is a better solution. My initial idea was to grab the signal from the head unit going into the ML amp but from what I have seen that signal is MOST. I have no idea what that means but I assume I should not mess with it. After spending hours last night and this morning trying to find any documentation of which wires I need to tap on the 30 pin plug out from the amp, I am throwing myself at the mercy of the brain trust here. Thanks in advance for any assistance.
-Mike
I have a 2013 LX570 with the ML system. I currently have a Rockford Fosgate 500w powered sub that I hooked up using the ML sub leads. I feel like I am missing some range and would like to try and grab the signal from the front door speakers unless there is a better solution. My initial idea was to grab the signal from the head unit going into the ML amp but from what I have seen that signal is MOST. I have no idea what that means but I assume I should not mess with it. After spending hours last night and this morning trying to find any documentation of which wires I need to tap on the 30 pin plug out from the amp, I am throwing myself at the mercy of the brain trust here. Thanks in advance for any assistance.
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
liv2spd
GS - 3rd Gen (2006-2011)
9
Jul 19, 2025 04:20 AM
Ceten
IS - 3rd Gen (2014-present)
4
Sep 14, 2021 09:02 PM
