LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

How to Fix Power Seat? (warning pictures)

Thread Tools
 
Search this Thread
 
Old 10-13-05, 01:58 PM
  #1  
theBishop
Driver School Candidate
Thread Starter
 
theBishop's Avatar
 
Join Date: Oct 2005
Location: PA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default How to Fix Power Seat? (warning pictures)

Hi, i have a 92 LS400 with the power seat problem described here:

http://www.cureline.net/lex/howtos/info_seats.htm

Anyway, here's a picture of the whole seat opened up:

Pic 01
The arrow is pointing to the problem area. Here's a closer picture of that area:

Pic 02

Anyway, that's black rod in the picture is turned by a motor on the other side of the seat. The rod is supposed to fit into a "splined shaft" on the other side (circled picture 2), which turns the shaft and raises/lowers the seat. I've tried to slide the rod more towards the right (center console side) of the seat, but its not really budging.

What tool(s) have you used to get the rod of fit over the shaft?

Also, for reference, he's a pic of the motor on the left (door side) of the seat:

Pic 03

Thanks
Old 10-26-05, 11:22 AM
  #2  
theBishop
Driver School Candidate
Thread Starter
 
theBishop's Avatar
 
Join Date: Oct 2005
Location: PA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

If anyone is interested, i was able to fix this problem, at least for the time being. Ultimately, the solution did involve Krazy gluing the rod to the adjustor, but i ended up removing the entire backrest to get to the problem area. Sadly, i didn't get a picture of this, but trust me, it wasn't pretty.

I had to "peel" back the leather a bit to reveal 3 bolts on either side of the seat. These bolts hold the backrest to the adjustor arms. I found that the teeth on the adjustors had worn a bit and the rod was about to turn without engaging the teeth. I don't like using glue to fix anything, but in the case, it seems to be working.
Old 06-06-06, 02:09 PM
  #3  
Suneet
Lexus Champion
 
Suneet's Avatar
 
Join Date: Mar 2002
Location: California
Posts: 1,833
Likes: 0
Received 4 Likes on 2 Posts
Default

I brought this thread up back to life. I'm about to attempt this on my seat. I get that weird twisting problem: my left side goes back but the right side doesn't.
Old 06-06-06, 02:12 PM
  #4  
Suneet
Lexus Champion
 
Suneet's Avatar
 
Join Date: Mar 2002
Location: California
Posts: 1,833
Likes: 0
Received 4 Likes on 2 Posts
Default

Has anybody else had difficulty fixing this problem?
Old 06-06-06, 03:01 PM
  #5  
AussiLS400
Driver School Candidate
 
AussiLS400's Avatar
 
Join Date: May 2006
Location: vic
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Lexus sell a new rod for about $20. You should be able to pull the side out with a lever to get the old rod out. You find the splines inside the rod strip. Part #72501-30050
Old 06-06-06, 09:51 PM
  #6  
Suneet
Lexus Champion
 
Suneet's Avatar
 
Join Date: Mar 2002
Location: California
Posts: 1,833
Likes: 0
Received 4 Likes on 2 Posts
Default

Thanks for the advice and part number. I haven't opened the seat up yet to take alook, but if the rod needs replacing, now I know exactly what to get
Old 06-09-06, 11:00 AM
  #7  
lorenzo816
Pole Position
 
lorenzo816's Avatar
 
Join Date: May 2004
Location: North Carolina
Posts: 211
Likes: 0
Received 2 Likes on 2 Posts
Default search next time..................

see friggin seat part two

and friggin seat

have fun!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
grumpi300
SC- 1st Gen (1992-2000)
2
02-04-13 04:48 PM
ucmysc400
IS - 1st Gen (2001-2005)
2
09-18-11 07:20 PM
sc300tttt
SC- 1st Gen (1992-2000)
3
06-01-06 07:44 PM
theBishop
Lexus Audio, Video, Security & Electronics
0
10-14-05 07:37 AM
meddle
SC- 1st Gen (1992-2000)
9
09-29-03 07:38 AM



Quick Reply: How to Fix Power Seat? (warning pictures)



All times are GMT -7. The time now is 05:40 PM.