2008 LS 600h + hL Global Dynamic press launch ...a really good in-depth description
Thread Starter
Pole Position
Joined: Feb 2002
Posts: 266
Likes: 21
From: Norway
2008 LS 600h + hL Global Dynamic press launch ...a really good in-depth description
...of the car I really did'nt knew how many things works even after all these years of ownership 
. As Donald would said it..They are smart people 
...
I put the pdf file in my public dropbox and it could also be opened there without downloading it:
https://www.dropbox.com/sh/elreu17db...xDXg_G6Ja?dl=0
. As Donald would said it..They are smart people ...I put the pdf file in my public dropbox and it could also be opened there without downloading it:
https://www.dropbox.com/sh/elreu17db...xDXg_G6Ja?dl=0
Last edited by Arvid; Aug 26, 2017 at 05:32 AM. Reason: a little more info and corrected heading + could be opened in my public dropbox
Thread Starter
Pole Position
Joined: Feb 2002
Posts: 266
Likes: 21
From: Norway
Driver School Candidate
Joined: Nov 2019
Posts: 2
Likes: 2
From: TX
Thank you for posting these!!
Trending Topics
9th Gear
Joined: Dec 2020
Posts: 9
Likes: 4
From: Florida
LS460 Horn Fixed $0!
My horn just stopped working all of a sudden. No idea what this dude in the Video is saying but I was able to fix it by watching him.
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
9th Gear
Joined: Dec 2020
Posts: 9
Likes: 4
From: Florida
LS460 Horn Fixed $0!
My horn just stopped working all of a sudden. No idea what this dude in the Video is saying but I was able to fix it by watching him.
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
9th Gear
Joined: Dec 2020
Posts: 9
Likes: 4
From: Florida
LS460 Horn Fixed $0!
My horn just stopped working all of a sudden. No idea what this dude in the Video is saying but I was able to fix it by watching him.
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
Use pry tool to pop panels off on both sides of steering wheel. One is around windshield wiper arm on the right. Back out the 2 torque screws, one on each side. Carefully separate airbag section from steering wheel. You shouldn't have to disconnect the wire harness.. There is a ground wire with a small Phillip's head screw through a round loop where it connects to back of airbag section. Remove the screw and clean the loop with steel wall. Reinstall everything and it works like normal. 😎
Thread
Thread Starter
Forum
Replies
Last Post
jntlex
LS - 4th Gen (2007-2017)
3
Dec 11, 2011 11:18 PM
encore888
LS - 4th Gen (2007-2017)
1
Aug 15, 2008 10:48 AM