here we go again...
yes fl law reads 28% front 15%rear ( if your at 27% n 14% no ticket, if your at 20% n 10% pay up) what we use at the shop lists at 35% n 20% but they also make a 30%(which is the same as the 35%) ea company lists product as they see fit.. you'd need to measure ea glass (bcuz ea glass will have different reflective properties) before & after the tint is installed to get an exact measure.. fyi you'll also get different readings if the measuring device has new or older batteries.. i have never been stopped in Ga for tint. but in NYC,NJ,DC all i got were warnings (bcuz i had an FL license an the car was registered in FL) and i had double 5%... so if they should have given me a ticket... too little too late... fyi my car now has 35% all the way around.... |
that last night shot looks hot!
|
i am considering the drop next, but i believe i might just tackle the front rotors and pads first.I'll have them turned and replace the front pads. That needs more attention than dropping the vehicle.
|
California there's no limit on how dark for the rears but can't have any up front. So mines is 5% rear windows and no tint on the front windows. I also have my sun shade up during the day to make it even darker inside the car.
|
15% all around except for windshield, which I'm either gonna do 50% or the llumar80 blue tint
|
Tint thread highjack! Im running on full mirror tint except the rear windsheild is 5% dark. I dont know what you could classify mirror tint % as but its like 50% all around. A cop flashed a light at my window and got blinded LOL!
|
Really nice look. And you have PM buddy.
|
Originally Posted by lbintab
(Post 7844591)
California there's no limit on how dark for the rears but can't have any up front. So mines is 5% rear windows and no tint on the front windows. I also have my sun shade up during the day to make it even darker inside the car.
|
Originally Posted by CJITTY
(Post 7845662)
Could you get away with at least 50% on front door windows?..or 70% on windshield and front doors to darken them a little without being too obvious for UV rejection
|
i love the way those wheels look on the car and usually i don't like the black windows but it flows well...do you plan to lower it any?
|
CJITTY, did you get the high speed balance done at Butler Tire? Or another shop?
|
Originally Posted by iRyan
(Post 7845801)
i love the way those wheels look on the car and usually i don't like the black windows but it flows well...do you plan to lower it any?
|
Originally Posted by CJITTY
(Post 7845662)
Could you get away with at least 50% on front door windows?..or 70% on windshield and front doors to darken them a little without being too obvious for UV rejection
Sorry to hijack your thread. You're a lucky man. I wish my gf would put in 3k for a set of rims. |
Originally Posted by TI II
(Post 7845834)
CJITTY, did you get the high speed balance done at Butler Tire? Or another shop?
|
Originally Posted by williakz
(Post 7845688)
Aren't they already at 70% from the factory? I thought that's why 35% film takes you to 35% VTL once it's applied. We need a tint expert here. Oops! Make that "VLT" - told you we need an expert...
By the way OP, something is not quite right...I think you need a front lip on that car to set it off :rolleyes: |
All times are GMT -7. The time now is 05:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands