Guys,

I picked up a controller from another member that had 3 presets. However the driver side sits about .5-1" taller than the passenger side. Since the instructions are in Japanese...how can I adjust or change the settings.

Any help or manual would be great.

 

you click on the bottom left button, it will go to the "change" screen where all 4 corners flashing. if you press the bottom left button again, the top left (front left) will flash and you can adjust that. then the front right, then the rears (rears can't be adjusted individually), and then it cycles

once you are done, click the top left button to memorize

 

Help! what is a Data System controller???

 

The Data System controller is for lowering the LS460L with air suspension.

 

Thanks. I get it ..... it is a after market mod to LS's with AS.

 

yes, it's an aftermarket controller that you tap on the oem ecu to lower the car. there are different settings to allow you adjust the height

 

Thanks Rominl....I just got back from the CES show and will try to modify the setting tonight...I wonder if I just accidentally adjusted the preset it had before I knew what I was doing.

Appreciate the help.

 

it should show the settings at all 4 corners anyway so you will know

 

where can i buy a datasystems lowering module for the ls460L?

 

you can email chung@prestigioussociety.com

that's where i got my unit from

 

thanks for the quick reply. i'll check with them now.