Hi everyone - tried repairing my actuator and I must have screwed something up as the door got stuck. I pried open the trim from the inside and tried prying various things to no avail. Any tips or suggestions?

 

If you rebuilt/replaced your motor housing and possibly did something incorrectly here is a more in depth image of what you need to do to open the latch.
1. Unlock the unit by rotating the locking bracket in the direction indicated.
2. Open the latch by rotating the latch release lever in the direction indicated. There are 2 different areas you can pry (push to the right from the upper location) or (push to the left from the lower location)



Regards,
Actuators Plus