When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yes that is what im wondering too , I have never touched this fuse box and everything had worked fine since ive had the car , I should of never messed with those dam LED lights , ok I will check that 10 amp fuse and see if its broken when I go on break
This may be a long shot, but once you've confirmed that the fuse is good, please try to replace at least one of the new LED with an existing incandescent light bulb - pick just any one of them! I suspect the low current draw by the LED's may be the culprit.
RKW , there are a lot of lights I didn't change to LED like the radio ,Navi,Glove box , I left those alone and they do not light up , let me ask you I will check that 10 amp fuse and regardless I will replace like you said they look good but you cant tell by the naked eye , should I replace with another 10 amp or a 7.5 like your picture shows ?
RKW , there are a lot of lights I didn't change to LED like the radio ,Navi,Glove box , I left those alone and they do not light up , let me ask you I will check that 10 amp fuse and regardless I will replace like you said they look good but you cant tell by the naked eye , should I replace with another 10 amp or a 7.5 like your picture shows ?
It should be a 7.5A according to the repair manual.
RLW you are the best man on this earth !!! I took out the 10 amp sure enough it was broken right in the middle put the 7.5 amp like you said everything all lit up perfect everything works stupid 1 minute fuse replace !!! You are the best dinner and drinks on me