Custom LED High Mount Third Brake Light Module
06-05-15, 10:15 AM
#1
Pole Position
Thread Starter
Custom LED High Mount Third Brake Light Module
I swapped out the high mount third brake light 21-watt filament bulb for a custom-made 30 LED light module on my '06. The light module is expertly engineered, designed and built on a custom printed circuit board with high-quality LEDs as well as resistors and a transistor to control voltage and protect the LEDs for long-life. It installs very easily and fits perfectly in the third brake light housing just behind the red diffuser lens, very literally plug 'n play. (There is polarity with LEDs, so if it doesn't light after being plugged in, reverse the plug-in.) And, there is no tail lamp out warning light on the dash with this LED brake light either.
It looks awesome, and should have been OEM on '04 - '06 LS. When lit, it matches the appearance of the OEM LED tail lights, and provides a more clear, bright, distinct and visible light when the brakes are applied, which is also an upgrade in safety as well. The OEM high mount brake light filament bulb burns out, and before it does, the bulb glass turns black which reduces the brightness. I really like this mod.
http://www.ebay.com/itm/121629575684...%3AMEBIDX%3AIT
It looks awesome, and should have been OEM on '04 - '06 LS. When lit, it matches the appearance of the OEM LED tail lights, and provides a more clear, bright, distinct and visible light when the brakes are applied, which is also an upgrade in safety as well. The OEM high mount brake light filament bulb burns out, and before it does, the bulb glass turns black which reduces the brightness. I really like this mod.
http://www.ebay.com/itm/121629575684...%3AMEBIDX%3AIT
The following users liked this post:
kos (02-27-19)
06-05-15, 11:36 AM
#3
Pole Position
Thread Starter
06-09-15, 06:32 PM
#4
Pole Position
Thread Starter
The detail in my pics is no better than the pics in the seller's ad. It is brighter than stock, more uniform light intensity across the entire red diffuser of the third high mount brake light. Looks factory, as it should have been.
06-09-15, 06:36 PM
#5
Pole Position
Thread Starter
06-09-15, 09:37 PM
#7
Pole Position
Thread Starter
The detail in my pics is no better than the many pics in the seller's ad. It is brighter than stock, more uniform light intensity across the entire red diffuser of the third high mount brake light. Looks factory, as it should have been. Also works well with my LED turn signal mirror covers.
Last edited by Tom57; 06-10-15 at 12:32 PM.
Trending Topics
06-11-15, 06:40 PM
#9
Pole Position
Thread Starter
I paid $100. The LEDs are high quality (30 in total) are not cheap, the pcb is custom and must be bought in quantity (not 1) and it's voltage regulated to insure longevity of the LEDs. Not worth my time to design, search for and acquire the parts, then build it. Sure, it's not for everyone, but with all of the unconventional mods folks here spend big $$$$ on, it's a no-brainer.
06-12-15, 10:16 AM
#11
Pole Position
Thread Starter
Build one Hilo, and then come back and provide a parts list, how to and some pics. I have 2 more LS's that I'll build two for with your DIY thread. 
06-12-15, 04:33 PM
#13
Pole Position
Thread Starter
Almost complete shopping list. Just need: the PCB with that configuration and in that size to fit inside the high mount brake light mount, and the plug in connector. Any particular input / output caps? (The link to LEDs are amber color, need white.)
06-13-15, 09:38 AM
#15
Pole Position
Thread Starter
Hilo, your comment applies to each and every instance a CL member chooses to not DIY a repair, maintenance or mod. Of course many CL members pay dealer or indy prices to maintain, repair or mod. Surely that wouldn't be "worth the price to you" either. Some purchase the parts and have them installed at dealer or indy. Others purchase parts, and DIY install (me). Any time someone doesn't build it or DIY, do you post such a comment saying it's not worth it to you? Really, a $100? You must have nothing else to do.