question about wheel offset

Reply Subscribe

Thread Tools

Search this Thread

Aug 10, 2014 | 01:14 PM

kkasaki

Thread Starter

Driver School Candidate

Joined: Oct 2012

Posts: 39

Likes: 1

From: HI

question about wheel offset

does any of you know if these wheel size will fit a 01 ls 430
18×9.5 with an offset of positive 36
19×12 with an offset of positive 50

Aug 11, 2014 | 05:54 AM

Kira X

桜犯罪シンジケート

iTrader: (24)

Joined: Oct 2008

Posts: 11,698

Likes: 675

From: 東京都

The first wheel should fit fine depending on your tire size.

The second one won't fit without a ton of fender work.

Aug 11, 2014 | 02:56 PM

kkasaki

Thread Starter

Driver School Candidate

Joined: Oct 2012

Posts: 39

Likes: 1

From: HI

thanks for reply

Aug 11, 2014 | 02:59 PM

VerbalKent

Rookie

iTrader: (1)

Joined: Mar 2014

Posts: 52

Likes: 3

From: Maryland

x2 on the fender work...but it'd look incredible once done!

Aug 11, 2014 | 03:09 PM

kkasaki

Thread Starter

Driver School Candidate

Joined: Oct 2012

Posts: 39

Likes: 1

From: HI

not looking for more the fender rolling, thankyou

Aug 11, 2014 | 10:56 PM

SQuester

Pole Position

Joined: Jun 2007

Posts: 312

Likes: 2

From: Arizona

Actually you'll be okay with a 12" +50mm, as it will sit 5mm further inward than my 10.5 +26mm rear setup with just shaved fenders.
Those 9.5 +36mm will be fine on the fronts also with room to spare(depending on ride height and amount of camber).

If anything, you'll run into clearance issues on the inside(rim/tire to suspension), as there will be 43mm less clearance than my rear setup. Might fit, might not on the inside as I haven't measured my inner clearance to give an educated answer.