rear control arm replacement
Instructor
Joined: Jan 2006
Posts: 757
Likes: 4
From: WA
My 05 non-air suspension:
Rear Left
Camber -1.5 (spec range -1.8 to -0.8)
Toe 0.10 (spec range 0.05 to 0.25)
Rear Right
Camber -1.8
Toe 0.10
Rear
Cross Camber 0.3 (spec range -0.5 to 0.5)
Total Toe 0.20 (spec range 0.10 to 0.50)
Thrust Angle 0.00
So in my case the only thing that is borderline is the rear right camber. Everything else is within range of where it should be.
Your rear left looks like a problem - if these same values apply to your car. By my chart you are out on both camber and toe.
Rear Left
Camber -1.5 (spec range -1.8 to -0.8)
Toe 0.10 (spec range 0.05 to 0.25)
Rear Right
Camber -1.8
Toe 0.10
Rear
Cross Camber 0.3 (spec range -0.5 to 0.5)
Total Toe 0.20 (spec range 0.10 to 0.50)
Thrust Angle 0.00
So in my case the only thing that is borderline is the rear right camber. Everything else is within range of where it should be.
Your rear left looks like a problem - if these same values apply to your car. By my chart you are out on both camber and toe.
Thread
Thread Starter
Forum
Replies
Last Post
rouxtoy
IS - 2nd Gen (2006-2013)
4
Jul 13, 2016 06:35 PM
