Ls 430 o2 sensor harness

Reply Subscribe

Thread Tools

Search this Thread

Oct 17, 2010 | 12:41 PM

luey2010

Thread Starter

Driver School Candidate

Joined: Oct 2010

Posts: 2

Likes: 0

From: new york

Ls 430 o2 sensor harness

Hi this is my first post. Yesterday I had replaced my o2 sensor. (bank 1 sensor 1). Got the old one out with some struggles, but managed to get it loose. unfortunatley i pulled to hard on the retainer clip and pulled it off. Now i cant connect the new sensor to the harness. I need advice, please help. The clip that broke is not the o2 sensor its the other clip it connects to. thanks

Oct 17, 2010 | 07:15 PM

User 82021

Driver

Joined: Oct 2010

Posts: 144

Likes: 0

you can buy the connectors from the dealer, they may tell you that you can only get it with the harness but it isnt true.

Oct 17, 2010 | 07:46 PM

m3nv

Pole Position

Joined: Nov 2006

Posts: 375

Likes: 3

From: GA

Like azcamber said, you can just order that part. Good luck!

Oct 17, 2010 | 08:42 PM

luey2010

Thread Starter

Driver School Candidate

Joined: Oct 2010

Posts: 2

Likes: 0

From: new york

ok so how do i connect them together? If my new 02 sensor is screwed into the manifold, and it just needs to plug into the connector? my problem is the connector has been pulled off of the wire harness. Does that mean I need the whole new harness? and how do I install it?