When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok, so here it goes i purchased 3000k/35w hid's for my fogs. at first when i turned them on they took about 2/3 min's to illuminate in yellow. after being on for about 10 min's my passenger side would start turning a greenish color pretty much it was losing or not keeping its power (whatever). so, i e-mailed the seller and he sent me a new bulb free of charge which i very much appreciated but, after replacing the passenger side with the new bulb the drivers side wasn't fully illuminating. battery is good and i changed the fuse to a 20a.
my question is, does anyone know what the problem is? or does anyone have this same problem?
p.s. i bought the lights from v-leds which i know they are not cl sponsors....just wanted to buy all my led's and hid's from the same place.
it might be the kit because i plugged my 20k HIDz right in and it powered right up so try to move the kit on both sides if its sill the same then it something with the car but if you switch the kit from one side to the other and the problem moves with the kit then you should know its the kit
HID's are usually a ON or OFF thing. A problem like the one you mentioned above usually means a problem with the bulb/ballast.
With so much after market HID manufacturers, so many vendors are buying cheaper brands to stay competitive.
Unfortunately, there isnt much to be done to fix it. Replace drivers side bulb and hope they last. Whatever you do, make sure your bare hands NEVER touch the glass part of the bulb.