Datasystem Controller Writeup with Pix
Hey guys. I just installed this unit on my 2004 LS, and now the AFS OFF light keeps flashing, but only when I plug in the controller. Does anyone have an idea of what may be causing this?
Thank you.
Anton
Thank you.
Anton
Lexus Champion
Joined: Jul 2006
Posts: 4,431
Likes: 9
From: Tx
You are right with the car list selection. Page 25 of the ASC680 user manual shows the right one for your harness. You can change at any time by pressing the upper left button and switch ignition on. On Page 25 you will find where TEMS is available. It is not possible to change on a UCF31.
is that one the same for 01-03?
Last edited by junjdm; Jul 24, 2008 at 04:03 PM.
Thread Starter
Racer
Joined: Apr 2007
Posts: 1,321
Likes: 15
From: Washington
Did you choose the right vehicle on the display when setting up? UCF31 with the reverse "C"
Here's a picture of the LS430 on 22's with ASC680 in low position. You can activate saved heights while driving therefore the controller starts every time with its WARNINGS screen in low mode. In the highest pos the LS becomes a SUV w/o suspension. Good after flash flood.
My stereo shop made that bezel, they also installed the controller for me.
www.sounds-good-stereo.com
Give Brett a call. They also replaced my stock ML sub with a JL Audio 10W6 free-air, now the bass car set off car alarms
- Anton
www.sounds-good-stereo.com
Give Brett a call. They also replaced my stock ML sub with a JL Audio 10W6 free-air, now the bass car set off car alarms
- Anton
Last edited by LA Wheel; Jul 26, 2008 at 10:44 PM.
