Need advice - Fuel cap gasket still building pressure
#1
Driver School Candidate
Thread Starter
Need advice - Fuel cap gasket still building pressure
I recently replaced the fuel cap gasket in my 1993 Lexus LS400 in order to mitigate the pressure build-up in the fuel tank. However, still after replacing the gasket, I have high pressure build-up in the fuel tank which releases when I start to unscrew the cap. Could somebody help me with this issue?
I suspect I may be tightening it too tight.. but I tighten until the cap clicks as it is supposed to. Currently I left it tight enough but not until the cap click, so I'll see at my next fill-up if the problem continues.
Thanks for your responses ahead of time!
I suspect I may be tightening it too tight.. but I tighten until the cap clicks as it is supposed to. Currently I left it tight enough but not until the cap click, so I'll see at my next fill-up if the problem continues.
Thanks for your responses ahead of time!
Thread
Thread Starter
Forum
Replies
Last Post
dataDave
LS - 1st and 2nd Gen (1990-2000)
2
04-02-18 08:54 AM
matchesLS
LS - 1st and 2nd Gen (1990-2000)
12
09-25-12 04:31 AM