koukisilvi

Hey guys, so I just installed a ksport air suspension in my 96 LS400, and wired everything up, and for some the reasons the compressors wont turn on to fill the tank. I can get them to turn on with direct power, but when I plug everything into the relays, they wont turn on. I think the pressure switch may be bad, but not sure how to test it/bypass it. I just ran the pressure switch wire from relay to the other to bypass, and still nothing. Any ideas on what it could be? I ordered another pressure switch, but for some reason I dont think that is the problem.

PureDrifter

iTrader: (10)

sounds like something you should run by KSport.

timmy0tool

iTrader: (7)

if it's not the pressure switch, it could be your relay. can you send us how you wired it? is there a ksport harness you plugged in? check your grounds.

skperformance

iTrader: (6)

have you tried a hot wire to the relay to trigger it?
Do you have a managment system or just a pressure switch ?