Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Vibration on Breaking

Thread Tools
 
Search this Thread
 
Old Sep 5, 2010 | 12:24 AM
  #1  
WGM's Avatar
WGM
Thread Starter
Driver School Candidate
 
Joined: Sep 2010
Posts: 9
Likes: 0
From: Arizona
Default Vibration on Breaking

My LS400 has been vibrating when the brakes are applied even though I had the brakes done (not by dealer) and front end work recently done, bushings, etc. But I am still have the problem. I put on Michelin tires for the first time and had the tires rotated and balance again. Still doing it. Any Idea of what the problem could be, i.e. why I still have very noticeable vibration in the steering wheel upon breaking. Do you think not have Lexus do the breaks is the were I went wrong or is there another potential problem that maybe someone out there also experience and identified. Thanks for your consideration and reply.
Reply
Old Sep 5, 2010 | 12:30 AM
  #2  
hobojoe's Avatar
hobojoe
Lead Lap
 
Joined: Apr 2007
Posts: 663
Likes: 1
From: CO
Default

Wheel bearings, bushings going bad in rear suspension components.....just a few starter ideas but search! And welcome to CL
Reply
Old Sep 5, 2010 | 12:59 AM
  #3  
black_LS's Avatar
black_LS
Advanced
15 Year Member
 
Joined: Jul 2007
Posts: 520
Likes: 23
From: Toronto
Default

Were the rotors machined or replaced?
Reply
Old Sep 5, 2010 | 06:04 AM
  #4  
billydpowe's Avatar
billydpowe
Lexus Champion
iTrader: (1)
 
Joined: Mar 2009
Posts: 3,225
Likes: 174
From: texas
Default

My older 99 started doing that, I replaced mine (front rotors and ceramic pads) on my 99LS earlier this year. Got mine from brake overstock (TRW brand) for $90 total (rotors & pads). smooth as satin...

You can call them at (888) 441-8808 or e-mail at: brakeoverstock@gmail.com
hay save some $$$$

Last edited by billydpowe; Sep 5, 2010 at 06:12 AM.
Reply
Old Sep 5, 2010 | 07:44 AM
  #5  
Mega's Avatar
Mega
Driver
 
Joined: Jul 2010
Posts: 101
Likes: 0
From: illinois
Default

What brake rotors did you use? China made ebay slotted or drilled rotors warp very fast. The owner of my ls before me installed ebay drilled rotors 2 days before i bought the car. They warped within 2 weeks.
Reply
Old Sep 5, 2010 | 12:21 PM
  #6  
billydpowe's Avatar
billydpowe
Lexus Champion
iTrader: (1)
 
Joined: Mar 2009
Posts: 3,225
Likes: 174
From: texas
Default

Originally Posted by Mega
What brake rotors did you use? China made ebay slotted or drilled rotors warp very fast. The owner of my ls before me installed ebay drilled rotors 2 days before i bought the car. They warped within 2 weeks.
I used the TRW Rotors and ceramic Pads.
TRW has been making rotors/brake equipment and pads longer than we have had Toyota's in America CHECK THEM OUT http://www.trwauto.com/

Last edited by billydpowe; Sep 5, 2010 at 02:46 PM.
Reply
Old Sep 5, 2010 | 12:55 PM
  #7  
RA40's Avatar
RA40
Super Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: May 2003
Posts: 20,895
Likes: 490
From: California
Default

First terminology:
Brake - is a device which inhibits motion
Breaking - to separate into parts with suddenness or violence


The most common cause is a warped rotor. If the rotor was not turned/machined during the brake service, this is the likely suspect. Which bushings were replaced in the front end?
Reply
Old Sep 5, 2010 | 02:31 PM
  #8  
KMinAF's Avatar
KMinAF
Rookie
 
Joined: Feb 2009
Posts: 63
Likes: 4
From: Utah
Default Second, what really is a "warped" rotor

Check out the following website for what is actually causing "warped" rotor vibration:
http://www.stoptech.com/tech_info/wp...rakedisk.shtml

Ceramic pads and good quality rotors should fix the problem
Reply
Old Sep 5, 2010 | 02:44 PM
  #9  
qewani1's Avatar
qewani1
Lead Lap
 
Joined: Jun 2008
Posts: 421
Likes: 0
From: indianapolis
Default

billy,
$90 total (rotors & pads) per each wheel or do you mean for all 4 wheels?
Reply
Old Sep 5, 2010 | 05:44 PM
  #10  
billydpowe's Avatar
billydpowe
Lexus Champion
iTrader: (1)
 
Joined: Mar 2009
Posts: 3,225
Likes: 174
From: texas
Default

Originally Posted by qewani1
billy,
$90 total (rotors & pads) per each wheel or do you mean for all 4 wheels?
sorry, the two front wheels, two rotors and one ceramic pad set for front wheels.

I tried your link http://celsiorup.com/ but I cant read it.

Last edited by billydpowe; Sep 6, 2010 at 05:29 AM.
Reply
Old Sep 5, 2010 | 09:23 PM
  #11  
azryno's Avatar
azryno
Driver School Candidate
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: AZ
Default

car parts wholesale has Brembo rotors for the fronts on sale for 75.00 for a pair. i just ordered some for my 1990 that is having the same problem.
Reply
Old Sep 6, 2010 | 01:11 PM
  #12  
qewani1's Avatar
qewani1
Lead Lap
 
Joined: Jun 2008
Posts: 421
Likes: 0
From: indianapolis
Default

billydpowe, site is in japanese, you may need to install the languages in your PC.
Which operating system do you have? windows XP?
Which internet browser do you use? Internet explorer or Firefox?
You may try this link
http://translate.google.ae/translate...%3Den%26sa%3DG

Last edited by qewani1; Sep 6, 2010 at 01:16 PM.
Reply
Old Sep 7, 2010 | 02:21 PM
  #13  
WGM's Avatar
WGM
Thread Starter
Driver School Candidate
 
Joined: Sep 2010
Posts: 9
Likes: 0
From: Arizona
Default

Yes the rotors where replace and the front bushings. Thanks for your reply.


Originally Posted by black_LS
Were the rotors machined or replaced?
Reply
Old Sep 7, 2010 | 02:22 PM
  #14  
WGM's Avatar
WGM
Thread Starter
Driver School Candidate
 
Joined: Sep 2010
Posts: 9
Likes: 0
From: Arizona
Default

Thanks, taking to dealer tomorrow, I ask the questions. I appreciate the advice!


Originally Posted by hobojoe
Wheel bearings, bushings going bad in rear suspension components.....just a few starter ideas but search! And welcome to CL
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RANDY P
SC - 1st Gen (1992-2000)
6
Feb 22, 2010 08:41 PM
gymrat
ES - 1st to 6th Gen (1990-2018)
11
Nov 19, 2008 05:44 AM
acenase
SC - 1st Gen (1992-2000)
6
Nov 20, 2007 11:32 AM
FinnLS
LS - 1st and 2nd Gen (1990-2000)
19
Aug 22, 2007 10:06 AM
jtgs400
Suspension and Brakes
8
Mar 17, 2005 04:09 PM




All times are GMT -7. The time now is 07:49 AM.