Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Just another n00bie.. '95 LS400

Thread Tools
 
Search this Thread
 
Old Apr 3, 2010 | 11:10 AM
  #1  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default Just another n00bie.. '95 LS400

So I've been a member of CL for quite some time now, and been searching for a 2nd gen LS for more than a year. Every time I would put a deposit, the car would get sold the day of.

So finally, I found one for a I guess a "good deal."

I live in Toronto, ON but the car is a US car as the previous owner used to work in University of Michigan.

Long story short, here are some specs:
-1995 LS400
-145,xxx miles (232,xxx kms)
-Dark Green on Tan Interior
-Timing belt + water pump + etc. were replaced during the 90,000 mile service
-Rust on rear quarter panel wheel well (see 2nd picture, can also be seen better on the last pic) but will fix the car.

Overall the car is not in the BEST condition, but I'm planning to get the car resprayed. Ideally change the color to black since I really wanted that color and it's not far off from its current color. Rust will be fixed of course.

Asking price was $5k, but after everything the purchase price was $2400 =D
It needed an alternator and battery, but that's about it. There's also clunking in the front whenever I go on speed bumps + rough roads. I searched and it's most likely the strut bar bushings.

Now for some pics:















Reply
Old Apr 3, 2010 | 11:34 AM
  #2  
amcdonal86's Avatar
amcdonal86
Pole Position
 
Joined: Nov 2009
Posts: 318
Likes: 0
From: Virginia
Default

Wow, great deal! Didn't the PO know that the back seats have cupholders?
Reply
Old Apr 3, 2010 | 11:44 AM
  #3  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default

Originally Posted by amcdonal86
Wow, great deal! Didn't the PO know that the back seats have cupholders?
Lol I took these pictures.. that drink is Rockstar w/ vodka so I didn't want to put it in the cup holder lol.

Originally Posted by Thermactor
the strut bar bushings are cheapest here:
http://www.trademotion.com/partlocat...?siteid=214082
208 delivered for the pair (to the US, I don't know about cananaananananananananaada)
That would be OEM replacement right? How about these bushings from this website:
http://www.mybushings.com/lexus-ls-4...hing-p-89.html
They're a lot cheaper

**EDIT: Nvm, the price you gave was for the actual strut rods w/ bushings. The bushings by itself is like $11 lol

Last edited by dj_hp; Apr 3, 2010 at 11:49 AM.
Reply
Old Apr 3, 2010 | 12:19 PM
  #4  
jadu's Avatar
jadu
live.love.laugh.lexus
15 Year Member
Liked
Loved
Community Favorite
iTrader: (42)
 
Joined: Oct 2008
Posts: 11,581
Likes: 90
From: CALI
Default

clean ride, especially the interior
Reply
Old Apr 3, 2010 | 12:22 PM
  #5  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default

Originally Posted by Thermactor
Where can you find the bushings by themselves? Not talking about the poly ones you linked to. If you have a link or place to get them, let me know, i can cancel my $208 order lol
Same website you gave me, except when you're looking at the part, click on "View Illustration" then click bushings

Originally Posted by jadu
clean ride, especially the interior
Thanks! It could be better after leatherique though. I need to apply some of that stuff
Reply
Old Apr 3, 2010 | 04:51 PM
  #6  
jasonm's Avatar
jasonm
Lead Lap
iTrader: (5)
 
Joined: Mar 2007
Posts: 794
Likes: 1
From: ca
Default

strut rod bushings are at mybushings.com for about $40 each. I have them installed on my 97 LS400....just need a shop with hydrolic press to press out old and press in new. About $15 per side
Reply
Old Apr 3, 2010 | 05:06 PM
  #7  
90wreck's Avatar
90wreck
Driver School Candidate
 
Joined: Mar 2010
Posts: 16
Likes: 0
From: Ohio
Default

Nice car.
I have a 95, I like it a lot.
Reply
Old Apr 3, 2010 | 07:23 PM
  #8  
Schnitz's Avatar
Schnitz
Lexus Test Driver
iTrader: (5)
 
Joined: Jan 2009
Posts: 1,100
Likes: 5
From: ON, Canada
Default

Nice pickup! You should come out to our Mississauga meets once a month. PM me if you're interested.
Reply
Old Apr 3, 2010 | 10:52 PM
  #9  
j stuff's Avatar
j stuff
Lexus Champion
iTrader: (5)
 
Joined: Sep 2005
Posts: 1,847
Likes: 4
From: Texas
Default

From one Filipino to another, pls remove that flag
Reply
Old Apr 4, 2010 | 05:20 PM
  #10  
Schnitz's Avatar
Schnitz
Lexus Test Driver
iTrader: (5)
 
Joined: Jan 2009
Posts: 1,100
Likes: 5
From: ON, Canada
Default

I just realized those pics are from Mississauga - literally 6 minutes away from the meet spot.
Reply
Old Apr 5, 2010 | 10:27 AM
  #11  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default

Originally Posted by Thermactor
I went through and ordered this part: 48674-40051 "STRUT BAR CUSHION" for $35/ea from Lexus of Pembroke Pines- I'll let you know if it's the part we're looking for or not. At Lexus of Pembroke Pines they're cheaper than the Adus polyurethane units. I'm as poor as they come so the $130 saved will be MOST welcomed
Let me know for sure if it's the right part. Hopefully it is. I don't want to buy a whole strut assembly if I don't need it lol.

Originally Posted by Schnitz
Nice pickup! You should come out to our Mississauga meets once a month. PM me if you're interested.
Thx! I think I've seen the thread about the west-end meets. And yep I live like 5-10 mins away from the meet spot. Also, I'm always at heartland timmies lol.

Originally Posted by j stuff
From one Filipino to another, pls remove that flag
Uh, what's wrong with having that flag?
Reply
Old Apr 6, 2010 | 07:31 AM
  #12  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default

Originally Posted by Thermactor
it is the right part but they called me to tell me that they can't get it, and that the only way to go is to get the whole strut assembly. scratch that :-/
Oh that's just ****ty.. Dealerships here in Canada are ripoffs. I just got quoted $89/side for JUST the bushings.
Reply
Old Apr 27, 2010 | 10:53 AM
  #13  
dj_hp's Avatar
dj_hp
Thread Starter
Driver School Candidate
 
Joined: Mar 2009
Posts: 19
Likes: 0
From: ON
Default

UPDATE:

Did the muffler delete yesterday. I'd say I'm pretty happy with the results.
I could go louder though but it sounds perfect right now with the car being stock.

http://www.youtube.com/watch?v=TktF-OREb1s
Reply
Old Apr 27, 2010 | 11:18 AM
  #14  
7schulz's Avatar
7schulz
Intermediate
15 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Oct 2009
Posts: 335
Likes: 2
From: Zionsville, IN
Default

Agreed on muf delete
Reply
Old Apr 27, 2010 | 01:27 PM
  #15  
Thermactor's Avatar
Thermactor
Lexus Test Driver
iTrader: (1)
 
Joined: Feb 2002
Posts: 866
Likes: 1
From: .
Default

Originally Posted by dj_hp
UPDATE:

Did the muffler delete yesterday. I'd say I'm pretty happy with the results.
I could go louder though but it sounds perfect right now with the car being stock.

http://www.youtube.com/watch?v=TktF-OREb1s
Thanks for posting the video.
Reply



All times are GMT -7. The time now is 12:55 PM.