LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

suspension tuning

Thread Tools
 
Search this Thread
 
Old 12-07-09, 01:29 PM
  #1  
VIP_Rob
Driver School Candidate
Thread Starter
 
VIP_Rob's Avatar
 
Join Date: Oct 2009
Location: Ok
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default suspension tuning

Hey guys i'm looking to fully build my suspension with the available products. I have decided on megan coilovers and I was looking for strut bars and rear sway bar kits and came across these 2....

this is the addco rear anti-sway bar



http://cgi.ebay.com/ebaymotors/90-97...item1c0b483954

this is an aftermarket strut bar


http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT

has anyone had any thoughts or experience with either one and are there better products im not finding? thanks for any help
Rob

Last edited by VIP_Rob; 12-07-09 at 01:35 PM.
Old 12-07-09, 01:44 PM
  #2  
Asia-H.T.
Pole Position
iTrader: (9)
 
Asia-H.T.'s Avatar
 
Join Date: Aug 2008
Location: North-Holland Amsterdam
Posts: 398
Likes: 0
Received 5 Likes on 5 Posts
Default

I have practicaly the same strut bar. Allthough I can't say how well it improves handling on it's own. Because I mounted it when I was getting the megans under too.

But for a price like that, you can't go wrong in my opinion.
Old 12-07-09, 02:29 PM
  #3  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

in all honesty, the strut bar wont really DO anything as far as the suspension is concerned because of the fact that LS' have double wishbone suspension all around, which places little load on the shock tower as the spring and shock share the load separately....it does help tie the chassis together over bumper though.
Old 12-08-09, 08:16 PM
  #4  
VIP_Rob
Driver School Candidate
Thread Starter
 
VIP_Rob's Avatar
 
Join Date: Oct 2009
Location: Ok
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

up to the top
Old 12-09-09, 10:01 AM
  #5  
steveski
Lexus Champion
 
steveski's Avatar
 
Join Date: Oct 2005
Location: TX
Posts: 1,884
Likes: 0
Received 4 Likes on 4 Posts
Default

I have ADDCO and it made a nice difference - I run Bilstein HD with H&R and other stuff like poly inserts to increase spring rate, etc. I imagine that with Megan's you may not need the ADDCO since you have so many adjustment settings, etc.

If you go with it be prepared to have to drill out the holes for your end links unless they changed this design flaw. Also you may have to modify mounting brackets as I did to make them fit in OEM holes. I contacted them and talked with a slacker engineer. I offered to help them design properly and he declined.

I would go with Megan's then see if you even need it.

It did make a nice difference in my car though.

I also have Tom's STB. It no doubt makes a nice difference for me - stiffens the chasis, etc. I took it off and noticed a difference.
Old 12-09-09, 10:23 AM
  #6  
LiCelsior
Retired

iTrader: (32)
 
LiCelsior's Avatar
 
Join Date: May 2007
Location: NY
Posts: 12,362
Received 17 Likes on 15 Posts
Default

well the rear sway bar is a nice upgrade from the filmsy 8mm or so stock one.

also i waited like 3 months for the addco bar from summit..
Old 12-09-09, 01:25 PM
  #7  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

going coilovers should NOT effect your decision to run a thicker rear sway bar.
Old 12-09-09, 02:43 PM
  #8  
VIP_Rob
Driver School Candidate
Thread Starter
 
VIP_Rob's Avatar
 
Join Date: Oct 2009
Location: Ok
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

is there not any other brands just addco and the ebay style of strut bar?
Old 12-10-09, 08:36 AM
  #9  
steveski
Lexus Champion
 
steveski's Avatar
 
Join Date: Oct 2005
Location: TX
Posts: 1,884
Likes: 0
Received 4 Likes on 4 Posts
Default

Addco is the only sway bar I know of. There are other STB makers out there. I have Tom's which I think is not discontinued.
Old 12-11-09, 05:03 AM
  #10  
Li Ls4
Lexus Champion
iTrader: (12)
 
Li Ls4's Avatar
 
Join Date: Jan 2009
Location: NY
Posts: 1,834
Likes: 0
Received 0 Likes on 0 Posts
Default

search for a supra tt strut bar u should have better results , i no it fits the 1st gen Ls and it should fit the 2nd gen Ls if im not mistaken.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KINETICS
Suspension and Brakes
20
07-15-20 08:45 PM
Hiroshi12
LS - 1st and 2nd Gen (1990-2000)
1
12-06-12 03:30 PM
GS400kid
Suspension and Brakes
3
03-10-03 09:09 AM
dgangi
Suspension and Brakes
2
06-12-01 11:01 PM
BLiu
GS - 2nd Gen (1998-2005)
5
04-28-01 08:15 PM



Quick Reply: suspension tuning



All times are GMT -7. The time now is 09:26 PM.