Help - Replacing Brake Bulbs
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2009
Location: GA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Help - Replacing Brake Bulbs
Hi everyone,
So i am trying to replace a friends brake bulbs on her 1994 ls400.
I pulled the carpet back infront of the tail light assembly in the trunk and noticed only two metal screws. If I unscrew those will the assembly pop out to then take the bulb adapter out and then replace and then rescrew in the tail light assembly?
If anyone can walk me through this that would be great, pictures are an added bonus!
Thanks all!
So i am trying to replace a friends brake bulbs on her 1994 ls400.
I pulled the carpet back infront of the tail light assembly in the trunk and noticed only two metal screws. If I unscrew those will the assembly pop out to then take the bulb adapter out and then replace and then rescrew in the tail light assembly?
If anyone can walk me through this that would be great, pictures are an added bonus!
Thanks all!
#2
VIP|EXEstyle セルシオ
iTrader: (3)
That's pretty much it. After removing the 2 screws, you will have to use a little force to pop out the tail light.
This tutorial should help:
http://www.lexls.com/tutorials/light...aillights.html
This tutorial should help:
http://www.lexls.com/tutorials/light...aillights.html
Thread
Thread Starter
Forum
Replies
Last Post
L-Sports
LS - 1st and 2nd Gen (1990-2000)
11
12-10-18 08:57 AM