Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Instrument Cluster Issues

Thread Tools
 
Search this Thread
 
Old Jan 25, 2008 | 10:09 PM
  #1  
marenwick's Avatar
marenwick
Thread Starter
Driver School Candidate
 
Joined: Jan 2008
Posts: 3
Likes: 0
From: California
Default Instrument Cluster Issues

Okay - Just got a '93 Lexus LS400 thru a trade for an '87 El Camino a few weeks ago.

And now I need some advice.

I come to find out that the instrument cluster is bad. Very much the same as I have read on this forum. The backlight is out, the tach and speedo needles are not lite and are broken off. At first, some of the lights would come on when cold morning or night, but then would flicker for a bit and then dissappear as the car warmed up or I drove a bit. The gas gauge seemed to have a twitch at times, and jump above the (E) but would eventually remain below the (E).

I searched this forum and read that there were a few who could repair my cluster and one of which (Lexustech) was only 20 minutes from my house. So I brought the unit to him and he took a look at it and confirmed what I had found. The bad news was, that he could not repair it as he said the gas gauge was severly damaged and the needles broken. He felt I should buy a rebuilt unit that he had.

Well I took my old unit home ( unrpaired ) and re-installed it. Guess what ? The gas gauge moved above the (E) rested at 3/4 full and then eventually moved to Full after a while. Yes I have full tank of gas. The same lack of lighting remained but they have not yet flickered. Could I have reset something when disconnecting the battery and unplugging/plugging the terminals of the cluster in ? Can this cluster be repaired at a reasonable price and who can do this ? And what is a reasonable price.

I have read about Jim Walker, Mr Wizard, LexusTech and Mikadotech.

Any Thoughts ?????
Reply
Old Jan 25, 2008 | 10:16 PM
  #2  
LiCelsior's Avatar
LiCelsior
Retired
CL Folding 500,000
15 Year Member
iTrader: (32)
 
Joined: May 2007
Posts: 12,364
Likes: 19
From: NY
Default

read the sticky up there? my post that helped a few people.

Originally Posted by LiCelsior
page 6 has alot of good info, and to fix the fuel gauge problem u need to change the capacitor on the main board labeled "C142" and i'm still trying to find out which capacitor is for the fuel gauge. changed C201, C205, and changed the C212 and my lights work, its just the fuel gauge and engine temp gauge isnt working.
C142 is the fuel gauge cap, didnt replace it then when i posted but have now and it works good.
Reply
Old Jan 26, 2008 | 04:45 PM
  #3  
marenwick's Avatar
marenwick
Thread Starter
Driver School Candidate
 
Joined: Jan 2008
Posts: 3
Likes: 0
From: California
Default

Thanks I will consider fixing myself but I am a bit nervous of EC.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KA8
LS - 1st and 2nd Gen (1990-2000)
3
Mar 30, 2016 07:18 PM
O. L. T.
SC - 1st Gen (1992-2000)
9
Nov 21, 2012 07:51 PM
md531e
LS - 1st and 2nd Gen (1990-2000)
5
Dec 12, 2010 01:42 PM
Gerson
ES - 1st to 6th Gen (1990-2018)
6
Jan 27, 2010 09:46 PM




All times are GMT -7. The time now is 05:38 PM.