^wrong place, this is more of a reference thread for confirmed fitments and feedback.

sorry PD my bad was just fishing for comments

OK so here is the current setup stock GS450h 18x8's no spacers waiting for my Megan's to be shipped

ssr vienna dish

19x9 +31 high disk,
19x10 +24 medium disk

federal s595 235/35 front , 245/35 rears

lowered on megans with about 1.25 inch gap

no fender mods

i know i need to go lower but i was rubbing and raised it abt 1.25 inches. gonna go lower next year when i have money to roll the fenders. it been raining the last few days so i need to re-polish the wheels.

Wald Duchatelet D23

19x9 +32
19x10 +37

Bridgestone Potenza RE050A 235/40ZR19 - 265/35ZR19

No camber, Cut rear fenders















Not going VIP, I'm the Executive

2000 LS 400
Auto Couture Magnifique
19"x10" +6 w/ Michelin Pilot Sport 225/40
19"x11" +12 w/ Michelin Pilot Sport 255/35

Megan Coilovers

Tucking top of tire (for now) with a couple mm of poke. If on air it would just tuck the wheel when layed out. Very little rubbing on fender liner only.

IMHO these are 10mm too aggressive to DIY fender roll/pull. I did it but there's some dimpling I'm going to have to get a body shop to fix.

Work Euroline
19x8.5 +0
19x10 -2

It sits lower in front now, but haven't had the chance to get any pictures yet.

Specs:

Weds Farmas D-Revolt

F: 17x8 +37 (235/45/17)
R: 17x9 +38 (255/40/17)

I want some 10mm spacers for the front and rear, but all in time.





BTW rhyi, your car is FINNNNEE ! I want your bumper lenses.. are they just ebay ones?

This is at stock height:

Specs:

Stern ST-5

F: 18x8.5 +45 (245/45/18)
R: 18x8.5 +45 (275/40/18)

Front has hub-centric 10mm spacer with longer wheel studs (Ebay) the rear has none. You do not notice the extra front width nor does the front wheels stick out noticeably. No rubbing at all for now.

20" w/Wrong Offset but I was kinda looking for an aggressive stance. Shop ended up ordering wrong fitment when i bought them but I liked it for sum reason. Fronts kinda stick out a little, rear is ok


Slow leak in back, yea i kno.

Schnitz - love the ride!!

Wheels:
Auto Couture Magnifique
19x9 +32 (with 15mm spacers) Nankang 215/35
19x10 +22 Nangkang 235/35

Megan Coils

Hopefully I can redo both barrels for the front to a +15 to get a good nice lip and fitment in the near future. Good setup if you don't want to do any major pulls. Front is slightly rolled and rear is cut with no roll or pull.

Thanks!
2LonG is right on the money. 9" +15 & 10" +15 is easy to fit with an Eastwood fender roll and gives a nice flush fitment. At least IMHO on a 2LS.

Ryhi, that thing is sick all laid out. Ya know, at first I wasn't a big fan of the Work Eurolines or SSR Viennas, but they're really starting to grow on me. Still happy with my MRR GT1s though

Got these wheels cheap but I don't know what model (gs?) they are 17 " can I use them on my 91LS400? My mechanic says they will rub Thanks anyone

Looks like a GS wheel. 'Rub' on what?