Need catalytic converters for 93 LS400
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2006
Location: ky
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need catalytic converters for 93 LS400
Has anyone replaced their cats with anything other than the $400 dealer cats?
Can anyone recommend and inexpensive source for replacement cats that are direct fits for the originals?
Thanks!
JB
Can anyone recommend and inexpensive source for replacement cats that are direct fits for the originals?
Thanks!
JB
#2
Pole Position
There are a few out there.
Wagner and Catco make some.
Here is a link to truckperformance.
click here
Also I wrote my problem in the CL forums last year. Next time I am going to take out the Y-pipe convertor totally and just have the two behind it. But, Hopefully there won't be a next time.
My story is here
and some other's are here
hope this helps
F paying 4 G's for all three!!!!
--
Wagner and Catco make some.
Here is a link to truckperformance.
click here
Also I wrote my problem in the CL forums last year. Next time I am going to take out the Y-pipe convertor totally and just have the two behind it. But, Hopefully there won't be a next time.
My story is here
and some other's are here
hope this helps
F paying 4 G's for all three!!!!
--
#3
Super Moderator
Try Magnaflow cats. You want a 3-way one.
Ideally, you want to get one with an entrance/exit .5 inch more than your present piping (generally it should be 2 inch stock).
Ideally, you want to get one with an entrance/exit .5 inch more than your present piping (generally it should be 2 inch stock).
Thread
Thread Starter
Forum
Replies
Last Post
LexuBarge
LS - 1st and 2nd Gen (1990-2000)
3
03-13-19 12:56 AM
engelber
LS - 1st and 2nd Gen (1990-2000)
16
02-08-18 10:30 AM
1993, 400, 93, california, catalac, catalytic, change, converter, converters, converyers, forum, ls, ls400, replace