LS400 intake problem
Thread Starter
Lexus Test Driver
Joined: Aug 2003
Posts: 909
Likes: 2
From: Florida
LS400 intake problem
I just changed the air filter in my car to an air filter cone with adapter, etc. But since the change, my car is showing hesitation when i shift. It keeps kicking back and it's annoying me. When I changed the filter, the plug that connects to the silver electronic filter piece, the car doesn't start. When I disconnect it, it does work. And now my check engine light is on because I disconnected the plug. Does anyone know what I can do or what the problem might be? Anything would help. Thanks guys!
1994 LEXUS LS400
105K miles
1994 LEXUS LS400
105K miles
Reconnect the wire and then remove the fuses to the EFI pooter for 30 seconds or so. This will default back to factory settings. If the CEL is still on after this, remove the fuses to the main ECU for a minute.
Thread Starter
Lexus Test Driver
Joined: Aug 2003
Posts: 909
Likes: 2
From: Florida
Thank you for the help! But where will I find the fuses to the EFI pooter? Please let me know...Thanks!
--John
--John
Originally Posted by RA40
Reconnect the wire and then remove the fuses to the EFI pooter for 30 seconds or so. This will default back to factory settings. If the CEL is still on after this, remove the fuses to the main ECU for a minute.
Thread
Thread Starter
Forum
Replies
Last Post
91LS400vgb
LS - 1st and 2nd Gen (1990-2000)
4
Jul 27, 2006 05:26 AM
