Sway Bar Bushings
03-13-05, 11:54 AM
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2004
Location: Washington
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Sway Bar Bushings
Does anyone know when the Diazen Sway Bar Bushings are going to be available for the 90-94 LS400s?
I'm trying to decide if I should buy Lexus OEM rear sway bar bushings ($60) or wait until these come out. Diazen said they were going to be available in September 04!
I'm trying to decide if I should buy Lexus OEM rear sway bar bushings ($60) or wait until these come out. Diazen said they were going to be available in September 04!
03-13-05, 03:16 PM
#4
hello, for my 96 the energy part # is 9-5162G for the front ,the diameter of the front sway bar is 1 1/16 in or 27 mm and 9-5153G for the rear, the diameter of the sway bar is 9/16 in or 14 mm,,these are greaseable bushings,with zerk fitting for greasing it out, you got to modify a lttle bit for the front but for the rear its direct bolt on, i think RA40 (mike) has some pix for his ( mine is different ), 
Last edited by bicol-ini; 03-13-05 at 03:20 PM.
03-13-05, 03:53 PM
#5
Lexus Champion
Trending Topics
03-14-05, 11:33 PM
#8
Driver School Candidate
Thread Starter
Join Date: Apr 2004
Location: Washington
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Problem 94'LS400 Rear sway 9mm
Energy Suspension doesn't carry anything that will fit a 9mm sway bar. Isn't that sad how small my rear sway bar is!!!
03-15-05, 10:45 AM
#9
Lexus Champion
Originally Posted by prep2
Energy Suspension doesn't carry anything that will fit a 9mm sway bar. Isn't that sad how small my rear sway bar is!!!
03-15-05, 12:00 PM
#12
Lexus Champion
Originally Posted by prep2
Pretty sure, 9mm! I took a wrench and tightened it on the sway bar then removed it and measured it.
03-15-05, 07:09 PM
#14
Mike-
Was looking at our data for the parts:
1 1/16" front bar part number is: ...............9-5162
9/16" rear bar part number is: .....................9-5153
Both of us listed the rear bar as 5/8" but the part # for 9/16"
Sorry for the confusion guys.
You want the 9/16" diameter.
Was looking at our data for the parts:
1 1/16" front bar part number is: ...............9-5162
9/16" rear bar part number is: .....................9-5153
Both of us listed the rear bar as 5/8" but the part # for 9/16"
Sorry for the confusion guys.You want the 9/16" diameter.
Thread
Thread Starter
Forum
Replies
Last Post