Well I got tired of the stock fog look with my 8000k low beams, so I purchased some cheap 3000k kit from ebay. When I got the kit I opened it up and saw these:




Now I had no idea what they were, but I did notice that when I had everything plugged into the housing and such, if I touched the blue onto the positive side of the clip and black onto the negative side that it would work. This got me wondering if I could use the other plug that came stock with the car, solder it to these wires and use it as a plug and play. Well I tried this and it didn't work and it seemed to of made it so my fogs don't work at all considering the other side wont turn on and it was left alone. I cut off the plug and resoldered these clips on the end of the wires again and it still doesn't work. So I ask, what do I do with these two clips? How do I make it work? Am I gonna have to buy a new fog harness?

 

Pal, you have to take more pictures than just 2 same pictures with 2 ZOOM IN plugs with wires...or scan the installation diagrams.