iv tried searching but havent found much.....i want to retro fit the infinity headlights on my gs but i have no clue on how to wire everything cuz im sure its not a plug and play thing...thanks for any help...

 

does your GS come with halogen or HID?

if it comes with HID, then all you need to do is put in the projectors and you'll be done. Everything else is the same.

if you have halogen, you'll want to make a wire harness for the HID ballast.

So which one do you have?

 

i got halogen...so that means i will have to install a hid setup as well?

 

All you need is a wire harness. Few people here make them or can help you find out how to get going. I would ask around.

 

if i was to get a aftermarket hid set then could they be just plug and play or would i still need a wire harness for them?

 

You can buy an aftermarket hid set that is plug and play, and it should also come with a wire harness. The set I bought from xenondepot.com came with one. Also you can purchase a wire harness from them for $30.00.

Be sure to get the correct hid set. If you are using the halogen housing, you will need D2R, and if you will do a retro fit, with projectors you will need D2S.

PM me if you need some other help.

 

Hey Noop! Whats going on?