TriniGS300

Ok so I have a 2001 GS300 and a HUGEEEEE box in my trunk right now with 2 12" Memphis Mojo's in it.... Theres this guy on ebay who sells some custom boxes for the GS (http://cgi.ebay.com/Custom-Lexus-GS-...item3ca6e0f8e0) Anyway the box specs say .91 cubic ft per chamber.... I know thats really small and my Mojos require at least 2.5 cu ft per chamber.... I dont know that much aout audio but thats a big difference... can I get away putting those subs in there without damaging the subs??? Thanks in advance for any help...

Frankdorn

iTrader: (7)

I think sealed box displacement is usually spec'd lower than ported box displacement for most speakers...you may wanna verify the sealed displacement spec for yours.

veleno

iTrader: (3)

Well, if each sub requires 2.5 cf. to perform well then that's what you gotta get. You can get away with a smaller enclosure by using polyfil but even then it's not ideal. I'd change the subs to one that's efficient and requires a smaller enclosure.

mkorsu

Your subs should have roughly 2.5 cubic feet for a ported enclosure. Sealed requirement is between .80 and 1.0 cubic feet.