sc key wont work for glove box and trunk lock!
#1
Lead Lap
Thread Starter
Join Date: Jul 2003
Location: California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
sc key wont work for glove box and trunk lock!
hey guys my key does not work for my trunk lock under the steering wheel and it wont work for my glove box.. i can open the truck in the back but the trunk pop inside the cars is locked plz anyone HELP!
#2
Lexus Champion
Originally Posted by DavE713
hey guys my key does not work for my trunk lock under the steering wheel and it wont work for my glove box.. i can open the truck in the back but the trunk pop inside the cars is locked plz anyone HELP!
My buddy has the same problem.. I believe the valet key prevents unlocking what you mentioned.
You will need to purchase a master key....
#3
Lead Lap
Thread Starter
Join Date: Jul 2003
Location: California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
^^ how long will it take for the dealer to cut me one and how much do they normally charge with and with out remote??? normally dont a valet key just open the door and start the car?my key can open the tunk still and it has a remote
#4
Lexus Champion
I don't believe valet keys have remotes??? but i could be wrong.
Maybe the locks in question were changed by the previous owner?
I believe if looking for a master key, Lexus will need your name and vin#.
There is also a clublexus sponsor that does keys... check the banners..
Maybe the locks in question were changed by the previous owner?
I believe if looking for a master key, Lexus will need your name and vin#.
There is also a clublexus sponsor that does keys... check the banners..
#6
Driver School Candidate
Join Date: Aug 2004
Location: Washington
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I had a key laser cut at a locksmith, it worked fine for the ignition, but not the trunk or glovebox. After comparing to my master key, I noticed it didn't have the ridge along the sides of the key cut out. ( Like the Valet Key) I took a dremel tool and a small disc and cut it out, and it unlocks everything now.
#7
Driver School Candidate
Join Date: Feb 2021
Location: Wa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I had a key laser cut at a locksmith, it worked fine for the ignition, but not the trunk or glovebox. After comparing to my master key, I noticed it didn't have the ridge along the sides of the key cut out. ( Like the Valet Key) I took a dremel tool and a small disc and cut it out, and it unlocks everything now.
Trending Topics
#9
use any tool Press the tool in behind the latch and by moving it and prying on the door , you will be able to get the glove box open
Last edited by paulpiker; 10-16-22 at 11:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
drewkaree
LS - 1st and 2nd Gen (1990-2000)
17
08-09-08 07:07 PM