2009 IS250/350 Grille Disassembly
Thread Starter
Pole Position
Joined: Dec 2010
Posts: 286
Likes: 2
From: PR
2009 IS250/350 Grille Disassembly
13. REMOVE RADIATOR GRILLE ASSEMBLY
(a) Using a clip remover, remove the 2 clips.
(b) Remove the 4 nuts.
(c) Disengage the 6 claws.
(d) Disengage the 8 claws and remove the radiator grille moulding.
14. REMOVE RADIATOR GRILLE
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 6 claws and remove the radiator grille.
(a) Using a clip remover, remove the 2 clips.
(b) Remove the 4 nuts.
(c) Disengage the 6 claws.
(d) Disengage the 8 claws and remove the radiator grille moulding.
14. REMOVE RADIATOR GRILLE
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 6 claws and remove the radiator grille.
Last edited by nonopr01; Mar 15, 2011 at 07:30 AM.
Pit Crew
Joined: Dec 2010
Posts: 220
Likes: 3
From: Canada
Sorry for bringing this thread back from the dead. I'm having some problems removing the grille. I've removed all the bolts and now I need to disengage the claws. How do I do that? The ones from the bottom are not visible so how do I disengage those ones? The grille won't budge.
Driver School Candidate
Joined: Jan 2012
Posts: 46
Likes: 0
From: UT
Sorry for bringing this thread back from the dead. I'm having some problems removing the grille. I've removed all the bolts and now I need to disengage the claws. How do I do that? The ones from the bottom are not visible so how do I disengage those ones? The grille won't budge.
Last edited by xredgiex; Apr 18, 2012 at 03:29 PM.
Trending Topics
Driver School Candidate
Joined: Jan 2012
Posts: 46
Likes: 0
From: UT
The easiest way I found was just taking off the bumper. Next time I do it I'll make a DIY.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
The easiest way I found was just taking off the bumper. Next time I do it I'll make a DIY.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
I have all the tools but really don't want to attempt to take the bumper off...I think it will be putting it back on that troubles me, I always get stuck on those steps
