Interior Carbon Fiber Overlay Kit
Thread Starter
Former Sponsor
Joined: Sep 2005
Posts: 426
Likes: 22
From: CA - USA
Interior Carbon Fiber Overlay Kit
Is now available...
http://aerotect.net/catalog/index.ph...c5616e021c6b8c
Adi did a great job designing this one. A little trimming is necessary to make sure everything wraps nice, but we are including the razor knife for the application.
You will need to remove your door trim and console pieces, and I think there is a thread somewhere on CL that shows how to do this. We should also have an instructional video available online by next week.
Order by the 16th to qualify for our holiday gift drawing.
http://aerotect.net/catalog/index.ph...c5616e021c6b8c
Adi did a great job designing this one. A little trimming is necessary to make sure everything wraps nice, but we are including the razor knife for the application.
You will need to remove your door trim and console pieces, and I think there is a thread somewhere on CL that shows how to do this. We should also have an instructional video available online by next week.
Order by the 16th to qualify for our holiday gift drawing.
I've been shunned for doing this to my ISF's "super nice" interior. Oh well!
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Top 10 Reasons to Buy a Lexus TX 550h+ (& 3 Reasons to AVOID!)
Michael S. Palmer
Top 10 Lexus & Toyota Models of the 1990s RANKED!
Joe Kucinski
10 Great Toyotas That Could Have Been Lexus Models
Joe Kucinski
Thread Starter
Former Sponsor
Joined: Sep 2005
Posts: 426
Likes: 22
From: CA - USA
As always, all of our Lexus products are priced for CL members... Plus we currently have free shipping, and if you order by Wednesday the 16th, you are eligible for a prize in our holiday drawing.
Fluxx, The complete kit will always run the same direction (all 7 pieces). This was the last piece we modified for this kit, and we must have cut it separately... Our computer cut kit will cut everything the same direction.
Phil if you catch that bring it by and we'll swap that piece out for you.
Phil if you catch that bring it by and we'll swap that piece out for you.
Yo thanks again to AeroTect for the fine CF wrap they did and the clear bra they installed on my sisters IS350C. It came cleaner than i expect
.. Anyone that wants to see it in person I'll be at AutoMax for the BBQ on Saturday.
.. Anyone that wants to see it in person I'll be at AutoMax for the BBQ on Saturday.
Thread Starter
Former Sponsor
Joined: Sep 2005
Posts: 426
Likes: 22
From: CA - USA
It's definitely a fairly easy DIY. A little time consuming though, only because you will need to remove all the trim pieces to do the installation.
Hope to have an installation video up by next week. In the meantime go to our website and click on "instructions," for three videos showing our CF film installations on other surfaces.
Hope to have an installation video up by next week. In the meantime go to our website and click on "instructions," for three videos showing our CF film installations on other surfaces.
Lead Lap
Joined: Feb 2009
Posts: 527
Likes: 0
From: Idaho
How about in a year if I decide to change back?
Thanks for your time.
The funny thing is I just bought all the supplies and did it myself a day before this pre-cut kit came out......dang.... Regardless, I think it came out fairly well. I really like the 3M vinyl, there is good quality in the material. I'm definitely not an expert at wrapping, but here's a few pictures of how it turned out. Thanks again AeroTect!
Yes you can undo the vinyl on the wood trim because it has a clearcoat. Simply take off the vinyl wrap and use goo gone or something similar to remove any left over adhesive (if any).