When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I welded mine in after the secondaries because the tune eliminates the CEL and there was no need to move the O2 bung in my situation so I welded after the bung where there was plenty of room.
The GESI cats eliminated 95+% of the smell and I lost no power
Do you know part number of GESI cats you have?
I found part number 7525, OBD2 2.5" in/out, 4" body. Hope this is right..
Do most people go with 2 aftermarket cats with the Header/Exhaust package?
Most don't but it's also dependent on your state and emissions inspections.
Originally Posted by ISFpowered
You sure about the raspy? I have RR intake, tune, PPE headers and a Borla exhaust and have zero rasp. The smell was really strong and turned out to be a leaking gasket on my passenger side (had black soot all over the heat shield next to it) replaced it and got rid of the majority of it. Still smells though but I don’t mind it lol.
Unfortunately anything catless you'll smell more of the exhaust fumes. But it's not the worst thing in the world.
--------------
To the OP, looking forward to seeing the car all wrapped up after the install! I'm sure you're going to love the gains, along with the responsiveness of the car! It's defiantly worth the wait that is for sure. But you're also getting the best of the best!
-Sean
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
When are you suppose to be getting them? Do you think my F10 has a chance against your car now? We should meet up, and see how bad you pull on my F10...😁
Most don't but it's also dependent on your state and emissions inspections.
Unfortunately anything catless you'll smell more of the exhaust fumes. But it's not the worst thing in the world.
--------------
To the OP, looking forward to seeing the car all wrapped up after the install! I'm sure you're going to love the gains, along with the responsiveness of the car! It's defiantly worth the wait that is for sure. But you're also getting the best of the best!
-Sean
Thank you RR Racing, Can't wait to get hands on them!
Could you just hurry up the process little bit..? Waiting is killing me..
When are you suppose to be getting them? Do you think my F10 has a chance against your car now? We should meet up, and see how bad you pull on my F10...😁
Now now, you have stage 2 tune on your bimmer.
I still have to wait 3 weeks ish for them.................
Now now, you have stage 2 tune on your bimmer.
I still have to wait 3 weeks ish for them.................
416 hp vs. 300 hp. MHD stage 2 probably puts my car at 340-350 hp max. I think you will beat me now especially on the top end. Are we still meeting up at FA Toyota tomorrow?
416 hp vs. 300 hp. MHD stage 2 probably puts my car at 340-350 hp max. I think you will beat me now especially on the top end. Are we still meeting up at FA Toyota tomorrow?
Yes sir I'll be there tomorrow to see you and what Toyota has to say
There were some miscommunications and schedules of mine and shop didn't work out well.
So, I'm finally going to install them next week
I'll try to post result later on
There were some miscommunications and schedules of mine and shop didn't work out well.
So, I'm finally going to install them next week
I'll try to post result later on