Gee2anIS

Hi, for those with the Novel Side vents, what material did you use to stick the carbon vents to the car? Thank you in advance

ISF4life

iTrader: (30)

those already come with industry strength 3M tape

Minh93

Remember shot some pics when you done.

I8ABMR

I was thinking of adding them with my toms kit

Meraki Autoworks

iTrader: (8)

Lets do it.

-Josh

msgs350

iTrader: (2)

Do a group but on these and the mirror covers!

Meraki Autoworks

iTrader: (8)

If you prove to me theres enough interest.

-Josh

semnosNSX

I may be in for a side vent group buy... if the price is right.

MileHIFcar

Pics of these vents on various colors of F's?

quattrokai

iTrader: (5)

I used automotive 3M tape. Use rubbing alcohol to clean the area and then a heat gun to heat up the fender a lil, then heat up the tape slightly and apply. Make sure to do a test fit first so you know how its going to fit and where it exactly lines up.

Gee2anIS

Yeah, mines didn't come with 3M tape, "I think" or I didn't see in the box-do I apply the alcohol only to the back of novel vents? Thanks for the info.

SoulFreak

iTrader: (1)

Since your vents didn't come with the 3M tape applied. It wouldn't hurt to lightly rub alcohol on the areas where you will apply the 3M tape stripe, on the vents. Chances are it's filled with oils from handling already. Normally, you want to rub alcohol to the mating surfaces. That may be covered with various oils, wax, detergents, and other solvents that won't allow the 3M tape to stick. The last thing you want, is for that expensive piece to fly away. In this case you also want to clean with alcohol the edges of the fender scoop areas. Where you're going to stick your carbon fiber piece. Follow, the techniques posted from other members above.

quattrokai

iTrader: (5)

yes, what SoulFreak said. Apply to both and dry both

fathorsejr

iTrader: (6)

I'm in for a group buy

msgs350

iTrader: (2)

Looks like there may be a few people interested in this thread. What could we expect for pricing/tiers?