justinco

Does anyone use the special programming on their IS-F for door lock and unlock functionality? I have been trying to program my car so that it locks all the doors after ~12mph and then unlocks all doors when the drivers door is opened from the inside after putting into P.

I followed the process in the manual and the car seems to recognize the activation (locks will lock then unlock to confirm), but the car is not locking/unlocking when I expect it to.

Any trick to this? I was able to successfully program the door unlock feature when I touch the handle from the outside (when car is locked), just having problems with the inside program features.

Meraki Autoworks

iTrader: (8)

go to the dealer to get it programmed.

artig

I had the same problem. It acknowledged the change, but didn't change anything. The dealer managed it during the normal service, but I forgot to ask how they did it..

justinco

Odd thing today...when I pulled into my garage, shut the car off, and opened the driver door, it unlocked all the other doors (how I programmed it).

I could have swore it didn't do it when I drove to work in the morning. I need to pay more attention tomorrow...if I'm still having issues I will have the dealer look at it.

Juanca

iTrader: (5)

Put car in to IG-ON
SHIFT to N
Hold unlock button & count to 5 - doors will lock/unlock to confirm
Shutdown (STAY IN N)
Hold lock button & count to 5 - doors will lock/unlock to confirm
Shutdown

justinco

Thanks, I got it figured out.