Help: Reassembling 3 Piece ADV1's
Dude I would contact ADV.1. That wheel is NOT safe to drive on. I've had 5 sets of ADV.1 and had them refinished by ADV.1 to keep the warranty intact 3 times when I switch color schemes, etc. You HAVE to use new ADV.1 hardware when you rebuild the wheels. The fasteners stretch when they are installed the first time and cannot be reused as they are then going to be re-stretch beyond their max tension and can snap and cause catastrophic wheel failure.
Also the 23ft/lbs is not an ADV.1 spec for their torque rating either. At the very least contact sean@adv1wheels.com (he has helped me with all of my refinishing) and order some new assembly hardware. It should be like 80-100 bucks. It's a small investment in not killing yourself when the hardware you used snaps in half.
Also the 23ft/lbs is not an ADV.1 spec for their torque rating either. At the very least contact sean@adv1wheels.com (he has helped me with all of my refinishing) and order some new assembly hardware. It should be like 80-100 bucks. It's a small investment in not killing yourself when the hardware you used snaps in half.
really hope I dont have to do all of this over again.
Sean got back to me almost immediately!
Wheel spec torque values are 27ft-lbs.
The wheel bolts ARE NOT torque to yield type bolts and DO NOT need to be replaced unless they are old and show signs or wear and tear. Obviously they recommend changing them out which I will do, however not until they arrive... for now I'm mounting them.
I guess we will see how the wheels balance out.
Wheel spec torque values are 27ft-lbs.
The wheel bolts ARE NOT torque to yield type bolts and DO NOT need to be replaced unless they are old and show signs or wear and tear. Obviously they recommend changing them out which I will do, however not until they arrive... for now I'm mounting them.
I guess we will see how the wheels balance out.
Wheels balanced very well with very little weight, ride extremely smooth, and have not fluctuated in pressure at all since being mounted yesterdat afternoon...
Not to mention look unreal.
Here is a couple quick phone snaps right after having them mounted! It was raining and overcast so I will have to grab some better quality pictures this weekend
The white A5 is my buddies with my old Vossen CV7's
Not to mention look unreal.
Here is a couple quick phone snaps right after having them mounted! It was raining and overcast so I will have to grab some better quality pictures this weekend
The white A5 is my buddies with my old Vossen CV7's
Good to see that you got it done on your own and that the wheels balanced out nice. They look sweet, props on the originality!
I was thinking that they where going to maybe look a little ricey from the pics but they don't at all. I think they look great against the black car.
I was thinking that they where going to maybe look a little ricey from the pics but they don't at all. I think they look great against the black car.
Sean got back to me almost immediately!
Wheel spec torque values are 27ft-lbs.
The wheel bolts ARE NOT torque to yield type bolts and DO NOT need to be replaced unless they are old and show signs or wear and tear. Obviously they recommend changing them out which I will do, however not until they arrive... for now I'm mounting them.
I guess we will see how the wheels balance out.
Wheel spec torque values are 27ft-lbs.
The wheel bolts ARE NOT torque to yield type bolts and DO NOT need to be replaced unless they are old and show signs or wear and tear. Obviously they recommend changing them out which I will do, however not until they arrive... for now I'm mounting them.
I guess we will see how the wheels balance out.
