Front fender splitter

Reply Subscribe

Thread Tools

Search this Thread

Apr 17, 2015 | 07:11 AM

amay9

Thread Starter

Driver School Candidate

Joined: Apr 2015

Posts: 11

Likes: 0

From: Ontario

Front fender splitter

I was wondering if the front fender splitters were easy to remove? Is it just screws in the wheel well and tabs or is there more to it? I scraped one side today in a parking lot and was wondering whether to touch up paint or just remove them as I got the car used and they were added on by the original owner and I don't really care for them. Thanks in advance

Apr 17, 2015 | 07:13 AM

cp2

Racer

iTrader: (1)

Joined: Mar 2015

Posts: 1,553

Likes: 397

From: CA

depends on which splitters they are. most are attached by a screw/bolt or two and maybe some adhesive. not much too it.

Apr 17, 2015 | 07:14 AM

amay9

Thread Starter

Driver School Candidate

Joined: Apr 2015

Posts: 11

Likes: 0

From: Ontario

Im pretty sure it's the oem one from Lexus but not 100 percent. Do I need a heat gun or just pull it off and goo gone?

Apr 17, 2015 | 07:20 AM

cp2

Racer

iTrader: (1)

Joined: Mar 2015

Posts: 1,553

Likes: 397

From: CA

a heat gun or blow dryer helps out a lot. I don't think I've ever seen an oem splitter from lexus. you have a pic?

Apr 17, 2015 | 07:22 AM

amay9

Thread Starter

Driver School Candidate

Joined: Apr 2015

Posts: 11

Likes: 0

From: Ontario

I'm just guessing because the original owner worked for Lexus and everything he added seemed to come through them which I've slowly been returning to stock. I'll take a look at how it's held on when I'm finished work or I can always just touch up paint it and forget about it! Thanks for the responses