IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

Official 3rd Gen IS Tint Thread - add your pics here!

Thread Tools
 
Search this Thread
 
Old Dec 12, 2021 | 09:08 PM
  #676  
swaangin's Avatar
swaangin
Racer
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2017
Posts: 1,691
Likes: 381
From: nj
Default

I looked for the cheapest installer in Jersey, then looked at their ratings.. were decent. Had ceramic tint (with lifetime warranty) installed for $220 and I thought that was expensive.. I think years back, tints used to be $100 but those turned different colors and were of lower quality. I was promised my tints would never change color and they are of higher quality. $400+ for tints? Insanity
Reply
Old Dec 12, 2021 | 09:09 PM
  #677  
TipsyTonio's Avatar
TipsyTonio
Racer
Liked
Loved
Community Favorite
Top Answer: 1
 
Joined: Jun 2021
Posts: 1,869
Likes: 2,331
From: Florida
Default

Originally Posted by swaangin
I looked for the cheapest installer in Jersey, then looked at their ratings.. were decent. Had ceramic tint (with lifetime warranty) installed for $220 and I thought that was expensive.. I think years back, tints used to be $100 but those turned different colors and were of lower quality. I was promised my tints would never change color and they are of higher quality. $400+ for tints? Insanity
Tell me about it. I tinted my girlfriend cars with Rayno S7 just 4 months ago for $279. Same dealer, just 4 months later for the same product, $315. At this rate they’ll be $1000 next year lmao
Reply
Old Dec 13, 2021 | 04:05 AM
  #678  
2017FSport's Avatar
2017FSport
Advanced
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2018
Posts: 533
Likes: 161
From: NC
Default

Originally Posted by TipsyTonio
Gotcha so computer cut is basically the way to go it seems. The thing that has me iffy about crystalline is that it basically goes from 40% to 20%. Which means, if I want to keep it 100% legal for Florida, I’d have to do 20% rear and 40% front. Which I’m scared is too light. And one shop warned me about it having a bronzish gradient to it. Basically not being full of a black tone. Do you know if the new 3IS or 3.5IS as some are calling it, is in your programs already? Thanks for the help man.
Unfortunately with most ceramic films, you won't get a true all black tone, or smoke color. For instance, CXP films have a greenish haze, CIR has blue, I know some of the 3M ceramics have blue, and some have bronze. Xpel is bronziesh too. But if you want a ceramic film, you have to accept it and move on. Now, you can get that all black or smoke color, but then you have to get into the dyed films which aren't good for heat rejection. And they can fade and change colors.

Yes, the 2021+ IS is in our system. That's how I tinted ours. But ironically, ours is the only 21+ that has rolled thru our shop.

In FL you guys don't have to pass inspection each year like we do, so your tint won't get metered unless a cop stops you. But just about every car in FL has at least 20% and the cops don't mess with them. Not saying they can't, but they don't.
Reply
Old Sep 8, 2024 | 03:59 PM
  #679  
Bandyjill's Avatar
Bandyjill
1st Gear
 
Joined: Sep 2024
Posts: 1
Likes: 0
Default

I purchased an IS350 F Sport Design in Iridium last Saturday and am looking to get the windows tinted. Initially, I was between 30% and 35% all around. There have been a few others that have said to not even bother with 30% or 35% and suggested 20% or maybe 25%. I'm a little concerned about getting the windows too dark, and want my car to look its best. Any regrets with the 30%? Also, is your color Iridium?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaveGS4
GS - 4th Gen (2013-2020)
484
Feb 2, 2025 06:24 PM
DaveGS4
IS - 2nd Gen (2006-2013)
646
Sep 18, 2022 05:26 PM
RandyinAZ
ES - 1st to 6th Gen (1990-2018)
125
Sep 15, 2020 07:51 PM
DaveGS4
ES - 1st to 6th Gen (1990-2018)
17
Mar 16, 2014 09:51 AM
jonnyxboi
GS - 3rd Gen (2006-2011)
15
Jul 10, 2010 02:38 PM




All times are GMT -7. The time now is 02:49 PM.