IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

tint shop removing front panel?

Thread Tools
 
Search this Thread
 
Old Dec 28, 2013 | 02:05 PM
  #1  
tclakfan's Avatar
tclakfan
Thread Starter
Driver School Candidate
 
Joined: Aug 2013
Posts: 19
Likes: 0
From: CA
Default tint shop removing front panel?

I know there is already a thread regarding tint related matter. Was reading but didn'treally see this on there.

Went to a tint shop this afternoon, trying to decide what percentage tint to get. This shop only dealt with solar gard. Anyone have this brand on your car?

Anyways the guy said that he would have to take the front panel off to do the front window tint.

Did the place you guys take it to require to do the same? I was hesitant because once you start taking stuff apart it might not be the same again. I.e creaks sounds etc.
Reply
Old Dec 28, 2013 | 02:39 PM
  #2  
Obscene14's Avatar
Obscene14
Driver
 
Joined: Nov 2013
Posts: 100
Likes: 0
From: Florida
Default

No panels need to come out. I have Solarguard HP smoke plus 20% all around. Great stuff. Clarity is excellent. I've used it on my last three cars.

Last edited by Obscene14; Dec 28, 2013 at 02:44 PM.
Reply
Old Dec 29, 2013 | 11:57 AM
  #3  
Echelon250's Avatar
Echelon250
Driver School Candidate
 
Joined: Dec 2013
Posts: 39
Likes: 1
From: Arizona
Default

I am a dealer for SolarGard and its good stuff...on top of that, I obviously tinted my own IS and there is definitely no need to remove the door panel if they know what they are doing.
Reply
Old Dec 29, 2013 | 12:21 PM
  #4  
iampraneel's Avatar
iampraneel
Intermediate
iTrader: (3)
 
Joined: Feb 2003
Posts: 279
Likes: 10
From: Elk Grove, CA
Default

Originally Posted by tclakfan
Anyways the guy said that he would have to take the front panel off to do the front window tint. Did the place you guys take it to require to do the same? I was hesitant because once you start taking stuff apart it might not be the same again. I.e creaks sounds etc.
My tint shop said the same thing until I told then 2014 was a new model and didn't have the tweeters mounted near the sail like in the 2IS. He obviously didn't confirm on the phone if he would or wouldn't have to remove the panel but when I went to the shop and he looked at it, the panel didn't need to come off.

Perhaps you are running into the same problem. Not that many shops have worked on the 3IS and if they have chances are they didn't tint the front windows.
Reply
Old Dec 29, 2013 | 12:33 PM
  #5  
AMNss's Avatar
AMNss
Lead Lap
 
Joined: Aug 2013
Posts: 491
Likes: 6
From: Middle east
Default

They don't need to remove the front panel for the new gen IS, as my car was tinted by a llumar tint shop without the need to remove the panel .
Reply
Old Dec 29, 2013 | 03:32 PM
  #6  
afdavey's Avatar
afdavey
Driver
 
Joined: Jun 2008
Posts: 135
Likes: 0
From: NJ
Default

Solar Gard - yup - have 5 cars with this brand of tint - as always the outcome rests with the INSTALLER. Material quality is good have used 50% - 35% - 20%.
The IS got 50% as the factory windows show a nice tint from the factory. I could have went with 35% and still would have been happy. Was trying not to go too dark on UW/Roja and with having dimming mirrors. Cost me $200. and the guy spent three hours doing the job.

NO panels were removed for the install (front windshield was not tinted). Look for another installer - Solar Gard also carries a good warranty through an authorized installer.

Last edited by afdavey; Dec 29, 2013 at 03:38 PM.
Reply
Old Dec 29, 2013 | 04:48 PM
  #7  
neilvosko's Avatar
neilvosko
Pole Position
 
Joined: Oct 2013
Posts: 216
Likes: 2
From: fl
Default

any great tint shops in north dade..south broward area, weston, pines, hallandale, etc?
Reply
Old Dec 29, 2013 | 11:08 PM
  #8  
tclakfan's Avatar
tclakfan
Thread Starter
Driver School Candidate
 
Joined: Aug 2013
Posts: 19
Likes: 0
From: CA
Default

Originally Posted by afdavey
Solar Gard - yup - have 5 cars with this brand of tint - as always the outcome rests with the INSTALLER. Material quality is good have used 50% - 35% - 20%.
The IS got 50% as the factory windows show a nice tint from the factory. I could have went with 35% and still would have been happy. Was trying not to go too dark on UW/Roja and with having dimming mirrors. Cost me $200. and the guy spent three hours doing the job.

NO panels were removed for the install (front windshield was not tinted). Look for another installer - Solar Gard also carries a good warranty through an authorized installer.
Thanks for the information. I will look around for another tint shop just to see what they say. I was leaning towards 35% myself. I was afraid 50% would be too light.
Reply
Old Dec 31, 2013 | 03:10 AM
  #9  
Obscene14's Avatar
Obscene14
Driver
 
Joined: Nov 2013
Posts: 100
Likes: 0
From: Florida
Default

Originally Posted by neilvosko
any great tint shops in north dade..south broward area, weston, pines, hallandale, etc?
Come up to Boca Raton. Superior tint is off Dixie Hwy just south of Spanish River Road. Jason and his crew are the best of the best. and he'll do the whole car for $100 with your choice of Solarguard or 3M. They do excellent work.

He's always super busy. Make an appointment. Three guys will jump on the car and you'll be in and out fast.

Last edited by Obscene14; Dec 31, 2013 at 03:17 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
luckytige
GS - 4th Gen (2013-2020)
28
Jun 21, 2016 01:51 PM
SC3coupe
SC - 1st Gen (1992-2000)
19
Aug 4, 2013 12:39 PM
jlho1980
IS - 2nd Gen (2006-2013)
4
Mar 13, 2012 07:31 PM
Gladius
IS - 2nd Gen (2006-2013)
47
Oct 20, 2011 10:48 AM
2k1GS3
GS - 2nd Gen (1998-2005)
9
Aug 3, 2001 01:18 PM




All times are GMT -7. The time now is 08:26 PM.