Navigation 2007 IS 250
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2018
Location: North Carolina
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Navigation 2007 IS 250
2007 IS250..digitizer went out so i replaced it. When i put back in then had only a white screen. So then I replaced the PCBoard for display..powers on and works, but everything seems backwards. If i hit the climate button on the driver side of unit..the destination screen pops up which is the corresponging button on the passenger side. All seem this way. All wiring can only go one way so I dont think there was a way to hook anything up backwards. The board I bought was exact same p/n as the original 462461-4600-1(2/3).. except the parentheses on the new one was (3/3). Any ideas would be appreciated..as I have no real control of the climate. Back up camera works fine
#2
Looking in the Navigation System Owners Manual there is a difference between the Left Hand Drive (LHD) model and the Right Hand Drive (RHD).
The LHD has the buttons CLIMATE,AUDIO,DISP and INFO on the left, ( closest to the driver) whereas
The RHD has these buttons on the right ( again closest to the driver)
so it looks like you have a RHD inside a LHD ???
Paul m.
The RHD has these buttons on the right ( again closest to the driver)
so it looks like you have a RHD inside a LHD ???
Paul m.
Thread
Thread Starter
Forum
Replies
Last Post
leav21
IS - 2nd Gen (2006-2013)
6
10-05-21 05:14 PM