j0elam

I recently bought a set of aggressive meister and was wondering what I need? I tried searching, but found nothing that I need answered.

My new wheel is 19x10/10.5 . I currently run 19x9.5/10.5 and my 19x10/10.5 set up is a little more aggressive. I definitely need camber kit all around. So.. my question is, which camber kit gives more negative camber? I seen from searches that megan offers +/-3 and spc maxes out at +/- 1.5-2. Is it possible for someone to give their insight on which is better and why? Or any other suggestions would be good. I'm currently looking at front megan camber kit MRS-LX-0313 and for rear MRS-LX-0311 . Also, do I need toe arms ? Thank you !

metaleckz

iTrader: (9)

Megan front camber kit
Megan rear camberkit
Megan rear lower control arm
Megan rear toe arm
Goodluck!

j0elam

I will probably need -5 or 6 camber for my wheels to fit. Will the megans do the job ?

02camryle

iTrader: (1)

i have megans LP and kinda slammed it with stock fsport wheels and I have -3 camber with no adjustable tophats with LPs its like natural camber..so if you want really aggressive camber like -99 or -100 lol..I mean you need all the parts metaleckz said..

j0elam

Thanks!


I need to make this rear fit . I currently just have natural camber from drop from my suspensions.

02camryle

iTrader: (1)

with that hella stretch on the tire its either tuck the entire wheel with hella camber....or perfectly fit the fender inbetween that stretch