Straight piped!
03-31-16, 12:33 AM
#1
Straight piped!
To moderator: please move this to the "Performance" subforum!
I have a 2006 IS250.
Would just deleting the mufflers and resonators give me this sound? Would I be able to pass smog (located in San Francisco, CA)? How would I be able to install an electronic cutout? What are the drawbacks with this setup?
I also really love this sound. Think this is the same as the two above, but with the second cat is deleted. Again, is this legal/will it pass smog?
I have a 2006 IS250.
Would just deleting the mufflers and resonators give me this sound? Would I be able to pass smog (located in San Francisco, CA)? How would I be able to install an electronic cutout? What are the drawbacks with this setup?
I also really love this sound. Think this is the same as the two above, but with the second cat is deleted. Again, is this legal/will it pass smog?
Last edited by Ling2IS; 03-31-16 at 01:05 AM.
The following users liked this post:
MBasobas (05-06-22)
03-31-16, 05:09 PM
#2
Driver School Candidate
In California if you delete any of the cats you will not be able to pass a legit smog. As far as deleting the mufflers and resonators that should be fine. To install a electronic cutout you would probably have to take it to an exhaust shop to have them weld it in place, unless you can weld or know someone that can weld.
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
03-31-16, 05:25 PM
#3
In California if you delete any of the cats you will not be able to pass a legit smog. As far as deleting the mufflers and resonators that should be fine. To install a electronic cutout you would probably have to take it to an exhaust shop to have them weld it in place, unless you can weld or know someone that can weld.
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
03-31-16, 07:08 PM
#4
Rookie
iTrader: (1)
Join Date: Nov 2011
Location: Virginia
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
In California if you delete any of the cats you will not be able to pass a legit smog. As far as deleting the mufflers and resonators that should be fine. To install a electronic cutout you would probably have to take it to an exhaust shop to have them weld it in place, unless you can weld or know someone that can weld.
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
Here is my car with invida midpipe and I had an exhaust shop make me a straight piped axle back.
https://www.instagram.com/p/BBlIKqYv...n-by=bagged2is
Thread
Thread Starter
Forum
Replies
Last Post