Siren Speaker Space
#1
Driver School Candidate
Thread Starter
Siren Speaker Space
Hey guys, this is a question for the volunteer firefighters and ems personnel on the forums. So i had bought the STL siren speaker and PA for my is250 and i am having trouble figuring out where to mount the speaker under the hood. This is the link to the speaker is below:
http://www.speedtechlights.com/produ...eaker?cat_id=7
thanks guys all the help is appreciated
http://www.speedtechlights.com/produ...eaker?cat_id=7
thanks guys all the help is appreciated
#2
Im assuming that you want it to be facing outward... If so, I would zip tie the siren to the 'coin slots' in the front plastic engine cover. This way you can have it facing outward just behind the grille.
Kindergarten drawing...
Kindergarten drawing...
#3
Fire Slayer
iTrader: (16)
Hello fellow firefighter. I would remove the bumper (there's DIY's on here) and mount it directly to the steel bumper frame. If you can bolt it it'd be more secure but if you can't thrn zip tie it around the bumper frame. Good luck and keep the pager on for "The BIG one!"
#4
Driver School Candidate
Thread Starter
Thanks guys I'm gonna try and do it this weekend and I'll update you guys! I'm EMS btw but a first responder is a first responder no matter what they are 🚒🚑🚔
Thread
Thread Starter
Forum
Replies
Last Post
simann
SC- 1st Gen (1992-2000)
23
03-05-07 01:43 AM