I'm gonna need to run camber after i put my wheels on. Any recommendations on a certain brand?

 

What wheels are you putting on? What size / offsets / tire sizes ? What suspension are you on

 

varrstoen es3 19x9.5 19x10.5 +22 all around. thinking of 225 or 235 in front with 245/35/ in back. Just on IS-F springs at the moment

 

Megan rear camber arms and your good to go as long as your not planning on dumping it.

 

I'm running the SPC camber ball joints for the front and I haven't had any issues. I'll probably end up going with megan rear camber arms.

 

Thanks for the help guys

 

I have the same wheel and tires specs, and when I was lowered on just Tiens I didn't have any issues or need any additional camber...but after the bags, the camber was needed to tuck.

 

If you need additional negative camber, go for the Megan upper control arms for the front and the Megan camber arms for the rear. The SPC balljoints will let you adjust 1.5* either way, but I think the Megan arms will let you go further.